87 Scottsdale R10-Front brakes-
I've installed both new Brake calipers and a hose on drivers side. Trying to bleed the system hasn't gone well. There was a LOT of dirt in the reservoir before I started. I syphoned as much out as I could. During bleeding, there's very little fluid and no air bubbles at the bleeder on the passenger side.
The drivers side seemed to bleed ok. The problem is- the passenger side rotor is being held tight and the brake pedal has too much travel. Is it possible the passenger side brake hose is collapsed or plugged, or could it be air still in the lines somewhere?