« previous next »
Pages: [1]   Go Down

Author Topic: Help identifying brackets  (Read 7860 times)

Offline stevieray36

  • Newbie
  • Posts: 23
Help identifying brackets
« on: July 10, 2007, 03:28:12 pm »
Does anyone know were I can get exploded diagrams of the power steering and air conditioner compressor brackets for a 82 c-10 w/350 SB. The truck originally had a 305. If anyone has pictures that might help identify and locate brackets email to steve.rayburn@smith-nephew.com.

I know I should have taken pictures, dropped my digital camera and need to replace.

Help!
Logged

Offline pcmcobra

  • Newbie
  • Posts: 60
Re: Help identifying brackets
« Reply #1 on: July 10, 2007, 09:19:43 pm »
Logged

Offline stevieray36

  • Newbie
  • Posts: 23
Re: Help identifying brackets
« Reply #2 on: July 11, 2007, 12:53:35 pm »
I have the alternator mounted and I have pictures of the power steering pump mounting.

All I need is pictures of the AC compressor mounted to a SB engine.

Again I have an 82 C-10 with a 350 SB.

Does anyone have this truck with air, if so could you take some pictures. It would be greatly appreciated.

I went to several used car lots and the three 80 model trucks did not have the compressor mounted.

Help!!
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: Help identifying brackets
« Reply #3 on: July 11, 2007, 01:47:00 pm »
What kind of compressor is it?  Do you have pictures of the brackets you have?  If so we can tell you where they go.
Logged

Offline yttaf

  • Newbie
  • Posts: 29
Re: Help identifying brackets
« Reply #4 on: July 11, 2007, 06:13:22 pm »
Quote from: stevieray36 on July 11, 2007, 12:53:35 pm
I have the alternator mounted and I have pictures of the power steering pump mounting.

All I need is pictures of the AC compressor mounted to a SB engine.

Again I have an 82 C-10 with a 350 SB.

Does anyone have this truck with air, if so could you take some pictures. It would be greatly appreciated.

I went to several used car lots and the three 80 model trucks did not have the compressor mounted.

Help!!

My 81 C-10 used to be a 305 swapped to a 350 with air. I'll take some pics when I get home...
Logged

Offline pcmcobra

  • Newbie
  • Posts: 60
Re: Help identifying brackets
« Reply #5 on: July 11, 2007, 08:26:33 pm »
maybe this will help?
Logged

Offline eventhorizon66

  • Senior Member
  • ****
  • Posts: 1909
A few more pics to help you out
« Reply #6 on: July 11, 2007, 09:45:59 pm »
« Last Edit: July 11, 2007, 09:53:05 pm by eventhorizon66 »
Logged
'85 C10 SWB 350 700R4 TKO600

Offline stevieray36

  • Newbie
  • Posts: 23
Re: Help identifying brackets
« Reply #7 on: July 12, 2007, 11:30:21 am »
Thanks for the pictures. There is a flat, triangular shaped bracket, large hole off center, and three holes one in each corner. Does anybody know were this is used?

Logged

Offline eventhorizon66

  • Senior Member
  • ****
  • Posts: 1909
Re: Help identifying brackets
« Reply #8 on: July 12, 2007, 11:58:43 am »
Post a pic of the bracket in question.  Or is your camera still out of service?

Does it have sort of a "leg" on one corner of the triangle?  If so you may be talking about a bracket that bolts flat to the cylinder head and supports the AC with the "leg" end.

It would be this one (directly behind the PS cap): http://i208.photobucket.com/albums/bb247/1985C10/P7110080.jpg
« Last Edit: July 12, 2007, 12:09:42 pm by eventhorizon66 »
Logged
'85 C10 SWB 350 700R4 TKO600

Offline stevieray36

  • Newbie
  • Posts: 23
Re: Help identifying brackets
« Reply #9 on: July 16, 2007, 07:34:19 am »
I want to thank all those who responded. I got it all back together this last weekend. Next time pictures will be required before dismantling.
Logged
Pages: [1]   Go Up
« previous next »