« previous next »
Pages: [1]   Go Down

Author Topic: removing undercoating?  (Read 3897 times)

Offline dumbucket1

  • Too Many Trucks
  • Junior Member
  • ***
  • Posts: 597
  • Coal Hauler
removing undercoating?
« on: April 06, 2008, 02:50:50 pm »
would it sound like a decent idea to use a propane torch in aiding removing the old undercoating on my 84 cab? I do have 2 fire extinguishers handy and I wont be working underneith. Jeremy
Logged
Chevy and GMC trucks ranging from 1973 to 2007

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: removing undercoating?
« Reply #1 on: April 06, 2008, 04:33:22 pm »
That should work. A heat gun might be a little more controlled though. If it were me I would do as much as possible without the heat.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Online VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19182
Re: removing undercoating?
« Reply #2 on: April 06, 2008, 05:53:20 pm »
I would use a pnuematic scraper and needle gun. That thing is gonna stink and make a mess!
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline dumbucket1

  • Too Many Trucks
  • Junior Member
  • ***
  • Posts: 597
  • Coal Hauler
Re: removing undercoating?
« Reply #3 on: April 06, 2008, 06:16:57 pm »
oh ya dang, I didn't think of the stench it will make. Wonder if harbor freight has one of them pnuematic scrapers for cheap.
Logged
Chevy and GMC trucks ranging from 1973 to 2007

Offline hotrod24

  • Senior Member
  • ****
  • Posts: 1696
Re: removing undercoating?
« Reply #4 on: April 06, 2008, 06:22:44 pm »
Logged
1980 1/2 ton shortbed project...
1978 pontiac grand prix...

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18462
    • http://www.73-87chevytrucks.com
Re: removing undercoating?
« Reply #5 on: April 07, 2008, 02:35:56 pm »
I coated mine down with Airplane stripper..  Took a couple coats to get it all off, but it came off.  When I was done, I wished I had just left it there...
Logged
Pages: [1]   Go Up
« previous next »