« previous next »
Pages: [1]   Go Down

Author Topic: tranny cooler lines  (Read 3911 times)

Offline nikesb1111

  • Newbie
  • Posts: 68
tranny cooler lines
« on: February 15, 2009, 07:20:51 pm »
Does the top tranny line go to the top or bottom of the radiator on an 86 k10 with a 700r4?
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18466
    • http://www.73-87chevytrucks.com
Re: tranny cooler lines
« Reply #1 on: February 15, 2009, 10:38:30 pm »
This question is a little confusing...  The bottom one won't be long enough to reach the top line without bending it??
Logged

Offline nikesb1111

  • Newbie
  • Posts: 68
Re: tranny cooler lines
« Reply #2 on: February 15, 2009, 11:41:17 pm »
Well im making my own lines and i forgot which ones go where. What im asking is if i start out with the top line on the transmission, where would that connect to on the radiator?
Logged

Offline eventhorizon66

  • Senior Member
  • ****
  • Posts: 1909
Re: tranny cooler lines
« Reply #3 on: February 16, 2009, 11:58:20 am »
I doubt that it matters which way you hook up the lines.
Logged
'85 C10 SWB 350 700R4 TKO600

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18466
    • http://www.73-87chevytrucks.com
Re: tranny cooler lines
« Reply #4 on: February 16, 2009, 12:22:51 pm »
Top connector is the return on the 700, bottom is the feed.  If you aren't running a external cooler, it really doesn't matter, but normally the bottom goes to the top of the rad and vice versa.
Logged
Pages: [1]   Go Up
« previous next »