« previous next »
Pages: [1]   Go Down

Author Topic: 1982 straight 6 swap  (Read 6485 times)

Offline fiyaweed06

  • Newbie
  • Posts: 40
1982 straight 6 swap
« on: May 01, 2009, 08:19:30 pm »
hello i have a couple of ? i pulled this motor out of a 1977 truck i bought I'm not sure which engine it is,but i know its strong as heck but the guy i bought it from got it in a trade so he knows nothing about it.So since the body was in horrible shape i bought a 1982 sierra straight 6 truck that i am going to do the swap on.I was wanting to know what all will need to be changed for me to drop this in i know in the 1977 the power steering lines where very close to the frame so they cut a little section out to clear the lines but I'm thinking they done because of the front belt setup. Sorry to be a pain but I'm learning.
Logged

Offline fiyaweed06

  • Newbie
  • Posts: 40
Re: 1982 straight 6 swap
« Reply #1 on: May 01, 2009, 08:20:31 pm »
pic 2
Logged

Offline fiyaweed06

  • Newbie
  • Posts: 40
Re: 1982 straight 6 swap
« Reply #2 on: May 01, 2009, 08:28:12 pm »
more pics
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19181
Re: 1982 straight 6 swap
« Reply #3 on: May 01, 2009, 09:09:18 pm »
You aren't being very clear on what exactly you are trying to do. Are you swapping a V8 in place of the 6 cylinder? Do you need help ID-ing the V8? What's the casting # near the bellhousing?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline fiyaweed06

  • Newbie
  • Posts: 40
Re: 1982 straight 6 swap
« Reply #4 on: May 01, 2009, 09:25:58 pm »
Sorry for not being clear but yes im swaping the v8 for the v6 and all i was wanting to know were what parts i would have to change for the bigger motor to fit. ;)
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: 1982 straight 6 swap
« Reply #5 on: May 04, 2009, 11:36:48 am »
reposition the frame stand to the 8 position and if it came out of a pickup and you got the engine mounts, drop it in.
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: 1982 straight 6 swap
« Reply #6 on: May 04, 2009, 05:33:27 pm »
the image label pic 6.jpg is the frame stands I am talking about.
If you clean those off, there will be 2 sets of holes, one with a 6 buy it and one set with an 8 beside it.  Just unbolt it and move it to the "8" selection.
Logged

Offline fiyaweed06

  • Newbie
  • Posts: 40
Re: 1982 straight 6 swap
« Reply #7 on: May 04, 2009, 05:34:06 pm »
ok thanks
Logged

Offline oldwhity

  • Senior Member
  • ****
  • Posts: 1037
Re: 1982 straight 6 swap
« Reply #8 on: May 04, 2009, 07:02:08 pm »
Did you find the casting numbers that Vile mentioned? They are on the rear of the block on the drivers side where the bellhousing bolts to the block. It does look like a newer motor or an older block with centerbolt heads and newer accessories.
Logged
Rob G.
81 Chevy K20 4x4 LWB stepside
I enjoy long quiet walks..........in a junkyard!

Offline fiyaweed06

  • Newbie
  • Posts: 40
Re: 1982 straight 6 swap
« Reply #9 on: May 09, 2009, 09:22:03 pm »
Yes i found them it says 5.0 so im thinking its a 305 when i was told it was a 350 but compared to my other 350 engines it seems to be one heck of a torque monster
Logged

Offline oldwhity

  • Senior Member
  • ****
  • Posts: 1037
Re: 1982 straight 6 swap
« Reply #10 on: May 10, 2009, 08:42:52 pm »
I believe what you have is a crate 305 and if it's anything like mine it's no torque monster.
Logged
Rob G.
81 Chevy K20 4x4 LWB stepside
I enjoy long quiet walks..........in a junkyard!

Offline fiyaweed06

  • Newbie
  • Posts: 40
Re: 1982 straight 6 swap
« Reply #11 on: May 11, 2009, 08:50:24 pm »
Quote from: oldwhity on May 10, 2009, 08:42:52 pm
I believe what you have is a crate 305 and if it's anything like mine it's no torque monster.
i'm not sure what it is but i can assure its a torque monster.
Logged

Offline chevyman350_82

  • Registered Users
  • *
  • Posts: 104
    • Car domain site...
Re: 1982 straight 6 swap
« Reply #12 on: May 15, 2009, 11:58:31 am »
Drop a BB in there then it will have some torque.  ;D
Logged
Pages: [1]   Go Up
« previous next »