« previous next »
Pages: [1]   Go Down

Author Topic: Check this Blazer out  (Read 5406 times)

Offline SUX2BU99

  • Senior Member
  • ****
  • Posts: 1478
    • My Cardomain Site. Truck is on Page 6.
Check this Blazer out
« on: January 26, 2010, 05:14:14 pm »
Runs 11's and the dude put truck bed innards in the back.

Logged
85 Chevy Silverado C10 short, wide, yellow, 2wd. Lowered, 60-over 350 with Dart Iron Eagle heads and Comp Cams XE268 cam, TH350 w/ shift kit, 3.40 Gov-lok 12 bolt.

Offline SUX2BU99

  • Senior Member
  • ****
  • Posts: 1478
    • My Cardomain Site. Truck is on Page 6.
Re: Check this Blazer out
« Reply #1 on: January 26, 2010, 05:15:25 pm »
More pics. You can see where the body work is cracking at the pillar to bedside joint.

Logged
85 Chevy Silverado C10 short, wide, yellow, 2wd. Lowered, 60-over 350 with Dart Iron Eagle heads and Comp Cams XE268 cam, TH350 w/ shift kit, 3.40 Gov-lok 12 bolt.

Offline SUX2BU99

  • Senior Member
  • ****
  • Posts: 1478
    • My Cardomain Site. Truck is on Page 6.
Re: Check this Blazer out
« Reply #2 on: January 26, 2010, 05:16:01 pm »
Annnnnnnd just for Vile. We all know how he loves them. Looks like dude spent some time smoothing it in:

Logged
85 Chevy Silverado C10 short, wide, yellow, 2wd. Lowered, 60-over 350 with Dart Iron Eagle heads and Comp Cams XE268 cam, TH350 w/ shift kit, 3.40 Gov-lok 12 bolt.

Offline team39763

  • Senior Member
  • ****
  • Posts: 1194
Re: Check this Blazer out
« Reply #3 on: January 26, 2010, 06:01:34 pm »
That looks pretty cool.  I kinda wanted to do something like that for my next racetruck project, but I wasn't sure how it'd look.  Is that one chopped?  What's under the hood?
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19174
Re: Check this Blazer out
« Reply #4 on: January 26, 2010, 11:43:51 pm »
I almost liked it til you posted that last pic! lol Believe it or not, it looks like he did a better job than most of the ones I've seen.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 78 Chevyrado

  • Z62 ON-ROAD
  • Site Supporters
  • Senior Member
  • ******
  • Posts: 2748
    • My Photobucket Site
Re: Check this Blazer out
« Reply #5 on: January 27, 2010, 01:34:37 am »
He better hope he never needs a new windshield installed.  ;)
Logged
Kenny

1978 C-20, 350/400, 3.73, Graystone Metallic, Raceline Renegade 8 Wheels - 18x8.5, 275/70R18 BFG KO's

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Check this Blazer out
« Reply #6 on: January 27, 2010, 05:55:33 pm »
" dude put truck bed innards in the back. "
Looks like a blazer floor to me? Has a pickup tail gate but that looks like about it.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18458
    • http://www.73-87chevytrucks.com
Re: Check this Blazer out
« Reply #7 on: January 27, 2010, 06:00:31 pm »
Definitely a Blazer floorboard.  The Fleetside tailgate will fit them also.  It was an option.
Logged

Offline SUX2BU99

  • Senior Member
  • ****
  • Posts: 1478
    • My Cardomain Site. Truck is on Page 6.
Re: Check this Blazer out
« Reply #8 on: January 28, 2010, 10:15:28 am »
My bad then; I didn't know the Blazer floorpan looked like that.  If the Fleet tailgate will fit a Blazer, has a Blazer gate ever been tried to fit on a Fleet truck? I presume then too that the stainless band on the back fits the Fleet gates too eh? Hmmmmmm......the possiblities for replacement of the one on my truck may have just opened up a whole lot :D

I didn't get to see anything under the hood. It ran pretty strong though and sounded good doing it.
Logged
85 Chevy Silverado C10 short, wide, yellow, 2wd. Lowered, 60-over 350 with Dart Iron Eagle heads and Comp Cams XE268 cam, TH350 w/ shift kit, 3.40 Gov-lok 12 bolt.

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18458
    • http://www.73-87chevytrucks.com
Re: Check this Blazer out
« Reply #9 on: January 28, 2010, 05:45:58 pm »
Yes the Blazer band will fit a pickup.  Many owners use this to "shave" the handle.

The tailgate probably can be made to fit, but why?
Logged
Pages: [1]   Go Up
« previous next »