« previous next »
Pages: [1]   Go Down

Author Topic: 87 axles to a 78 k 10  (Read 3720 times)

Offline howlinwolf

  • Registered Users
  • *
  • Posts: 220
87 axles to a 78 k 10
« on: March 28, 2010, 12:21:03 pm »
will there be any problem with the swap? if so what? 

my rear end is out, and i found a set of axles for 150 bucks. front and back. Any problem with a swap?
Logged
78 Chevy Custom Deluxe flatbed, PROPANE POWERED

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19183
Re: 87 axles to a 78 k 10
« Reply #1 on: March 28, 2010, 12:52:58 pm »
Make sure the ratio's match. Other than that the conversion U-joint should be needed for the companion flange/yoke
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline howlinwolf

  • Registered Users
  • *
  • Posts: 220
Re: 87 axles to a 78 k 10
« Reply #2 on: March 28, 2010, 02:11:58 pm »
the ratio shouldnt be a big deal if im swapping both axles i would assume. i just wasnt sure if there was a different mounting or anything. 

are the spring mounts for the 4 wheel drive 1/2 ton trucks the same between 78 and 87.
Logged
78 Chevy Custom Deluxe flatbed, PROPANE POWERED

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19183
Re: 87 axles to a 78 k 10
« Reply #3 on: March 28, 2010, 02:21:58 pm »
Yes
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline howlinwolf

  • Registered Users
  • *
  • Posts: 220
Re: 87 axles to a 78 k 10
« Reply #4 on: March 28, 2010, 02:23:09 pm »
shweet. kill 2 birds then mabey.
Logged
78 Chevy Custom Deluxe flatbed, PROPANE POWERED

Offline howlinwolf

  • Registered Users
  • *
  • Posts: 220
Re: 87 axles to a 78 k 10
« Reply #5 on: April 21, 2010, 08:08:10 am »
well i swapped the axle onto the trucK and the yoke is too wide on the rear end...its reported to be off an 87...whats up
Logged
78 Chevy Custom Deluxe flatbed, PROPANE POWERED

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19183
Re: 87 axles to a 78 k 10
« Reply #6 on: April 21, 2010, 08:43:34 am »
Quote from: VileZambonie on March 28, 2010, 12:52:58 pm
Make sure the ratio's match. Other than that the conversion U-joint should be needed for the companion flange/yoke
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline howlinwolf

  • Registered Users
  • *
  • Posts: 220
Re: 87 axles to a 78 k 10
« Reply #7 on: April 21, 2010, 09:35:06 am »
OH NOOOOOOOO i cant believe i missed that. jeeze could have saved myself some hearache.  Vile i owe you a drink, or a steak dinner one.
Logged
78 Chevy Custom Deluxe flatbed, PROPANE POWERED
Pages: [1]   Go Up
« previous next »