« previous next »
Pages: [1]   Go Down

Author Topic: how do i remove the whipper motor?  (Read 7300 times)

Offline 87454westernhauler

  • Frequent Member
  • **
  • Posts: 453
how do i remove the whipper motor?
« on: December 20, 2010, 09:17:22 am »
i have an 87 r10 chevy. i put a 79 front clip on it, and had to unbolt the whipper arm shafts. the mecanism and motor are all loose, but i need to to seperate the motor from the rest of the unit. i think loking at the back of the motor on the out put shaft the i just have to take a nut off of it, and can i use the same motor on a 79 meconism or do i need to put the motor from the 79 on it too? problem with that is that the 79 motor is bad. trying to be cheep.
Logged
86 c10 350 sbc 700R4 Daily Driver
79 gmc c20 350 th350
78 k1500 4x4 350 th350

Offline 756man

  • Newbie
  • Posts: 75
Re: how do i remove the whipper motor?
« Reply #1 on: December 20, 2010, 12:18:02 pm »
What's a whipper motor ?  Or do you mean wiper ?
Logged
1985 Chevy K-20 longstepside, 350,Turbo 400

Offline bobcooter

  • Junior Member
  • ***
  • Posts: 788
  • 1979 Scottsdale C-20
Re: how do i remove the whipper motor?
« Reply #2 on: December 20, 2010, 12:43:55 pm »
I'm not sure which one the 87 takes. Compare them side by side and see if they look alike I guess. I know in 78 they switched styles. Not sure after that.
Logged
'79 C-20, 350/400, 3:73 gears, 9 leafs and a headache rack
Favorite Quote, "Good judgement comes from experience. Experience comes from poor judgement."

Offline 87454westernhauler

  • Frequent Member
  • **
  • Posts: 453
Re: how do i remove the whipper motor?
« Reply #3 on: December 20, 2010, 01:53:11 pm »
do i have to seperate the motor from the arm meconisms to get them off of the cab? wiper motor! sorry
Logged
86 c10 350 sbc 700R4 Daily Driver
79 gmc c20 350 th350
78 k1500 4x4 350 th350

Offline bobcooter

  • Junior Member
  • ***
  • Posts: 788
  • 1979 Scottsdale C-20
Re: how do i remove the whipper motor?
« Reply #4 on: December 20, 2010, 02:56:31 pm »
There is a nut that attaches the wiper motor to the wiper arms where it sticks throught the hole in the firewall. Then there are three bolts that attach the wiper motor to the firewall.
Logged
'79 C-20, 350/400, 3:73 gears, 9 leafs and a headache rack
Favorite Quote, "Good judgement comes from experience. Experience comes from poor judgement."

Offline 87454westernhauler

  • Frequent Member
  • **
  • Posts: 453
Re: how do i remove the whipper motor?
« Reply #5 on: December 21, 2010, 11:11:35 am »
thats all i needed to know, thank you :)
Logged
86 c10 350 sbc 700R4 Daily Driver
79 gmc c20 350 th350
78 k1500 4x4 350 th350

Offline 87454westernhauler

  • Frequent Member
  • **
  • Posts: 453
Re: how do i remove the whipper motor?
« Reply #6 on: January 05, 2011, 04:03:47 pm »
got it all bolted in over christmas, the 87 whiper motor worked on the 79 meconism. now i need to fix the distributor and finish building my new steering coulmn out of busted 87 tilt column, a 79 non tilt and an 88 s10 blazzer non tilt column. then more rust repair!!!!! :(fun!!!!
Logged
86 c10 350 sbc 700R4 Daily Driver
79 gmc c20 350 th350
78 k1500 4x4 350 th350

Offline howlinwolf

  • Registered Users
  • *
  • Posts: 220
Re: how do i remove the whipper motor?
« Reply #7 on: January 05, 2011, 06:10:52 pm »
westernhauler, look into google chrome, it will catch spelling mistakes with a red squiggly line. then just right click and TADA!
Logged
78 Chevy Custom Deluxe flatbed, PROPANE POWERED

Offline 87454westernhauler

  • Frequent Member
  • **
  • Posts: 453
Re: how do i remove the whipper motor?
« Reply #8 on: January 06, 2011, 07:28:55 am »
sorry
Logged
86 c10 350 sbc 700R4 Daily Driver
79 gmc c20 350 th350
78 k1500 4x4 350 th350

Offline bobcooter

  • Junior Member
  • ***
  • Posts: 788
  • 1979 Scottsdale C-20
Re: how do i remove the whipper motor?
« Reply #9 on: January 07, 2011, 12:51:31 pm »
Quote from: 87454westernhauler on January 05, 2011, 04:03:47 pm
got it all bolted in over christmas, the 87 whiper motor worked on the 79 meconism. now i need to fix the distributor and finish building my new steering coulmn out of busted 87 tilt column, a 79 non tilt and an 88 s10 blazzer non tilt column. then more rust repair!!!!! :(fun!!!!
Must be some kind of steering column!
Logged
'79 C-20, 350/400, 3:73 gears, 9 leafs and a headache rack
Favorite Quote, "Good judgement comes from experience. Experience comes from poor judgement."

Offline 87454westernhauler

  • Frequent Member
  • **
  • Posts: 453
Re: how do i remove the whipper motor?
« Reply #10 on: January 11, 2011, 12:32:01 pm »
its almost together. just need to make a new push rod for the ignition switch and the high beam switch, and glue the lower bezel cover thing to the uper half of the column. it not tilt though.
Logged
86 c10 350 sbc 700R4 Daily Driver
79 gmc c20 350 th350
78 k1500 4x4 350 th350

Offline bobcooter

  • Junior Member
  • ***
  • Posts: 788
  • 1979 Scottsdale C-20
Re: how do i remove the whipper motor?
« Reply #11 on: January 11, 2011, 03:52:37 pm »
Just be careful you get it all together real good. Don't want to hit the ditch when you try to turn it! I think you could probably find one in one piece that would work fairly cheap.
Logged
'79 C-20, 350/400, 3:73 gears, 9 leafs and a headache rack
Favorite Quote, "Good judgement comes from experience. Experience comes from poor judgement."

Offline 87454westernhauler

  • Frequent Member
  • **
  • Posts: 453
Re: how do i remove the whipper motor?
« Reply #12 on: January 15, 2011, 10:05:29 am »
it work good and is functional and free ::). i bolted it in and it works good. ;)
Logged
86 c10 350 sbc 700R4 Daily Driver
79 gmc c20 350 th350
78 k1500 4x4 350 th350
Pages: [1]   Go Up
« previous next »