Author Topic: Slow moving project. Some questions  (Read 12453 times)

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Slow moving project. Some questions
« Reply #15 on: April 15, 2011, 10:53:02 pm »
     Did you ever check your cab and bed mounts to see if they were the issue with cab and bed alignment ?
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Phil.

  • Newbie
  • Posts: 25
Re: Slow moving project. Some questions
« Reply #16 on: April 15, 2011, 11:05:42 pm »
Well I don't know how to properly check them I just kind pushed up on my cab and it didn't really move. They looked decent I'm thinking its the tire up front being smaller

Offline Altec

  • Newbie
  • Posts: 61
  • Custom De-Luxe
Re: Slow moving project. Some questions
« Reply #17 on: April 15, 2011, 11:14:50 pm »
Lower the tire pressure on the other side. That will answer that question.
1981 K10 Short Bread - 6.5NA - SM465

Offline Phil.

  • Newbie
  • Posts: 25
Re: Slow moving project. Some questions
« Reply #18 on: April 18, 2011, 04:05:10 pm »
I found some 36's with rims I like not much tread left but for 80$ can't beat that for new wheels lol. I'll post pics later

Offline gregcars

  • Newbie
  • Posts: 21
Re: Slow moving project. Some questions
« Reply #19 on: April 19, 2011, 01:02:31 am »
Looks like the box was jammed up into the back of the cab, drivers side. Should just loosen the bed/cab bolts
and realign box with cab ?
08 hummer, 08 chevy crew, 82 crew hauler
81 c10 short wide, 77 gmc indy pace truck
74 gmc jimmy ,71c20 4x4 comm. flatbed
72 gmc high serria 4x4 , 64 c20

Offline Phil.

  • Newbie
  • Posts: 25
Re: Slow moving project. Some questions
« Reply #20 on: April 21, 2011, 05:24:44 pm »
here it is with the new wheels and tires


Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: Slow moving project. Some questions
« Reply #21 on: April 21, 2011, 05:32:11 pm »
looks good!