« previous next »
Pages: [1]   Go Down

Author Topic: jumped the gun  (Read 3148 times)

Offline onelow84

  • Registered Users
  • *
  • Posts: 113
jumped the gun
« on: April 12, 2011, 09:29:12 pm »
Ok so about 6 months ago I was given an 84 short wide custom deluxe, a real piece of crap. The plan was to tear it down, build up the rolling chassis, get a new bed and a donor truck for everything else. long bed trucks around here a pretty cheap. So anyway i took the cab off and put it aside assuming i would be buying a decent rust free long bed and would probably end up scrapping this cab. I have decided to just repair the cab. The problem is today I stripped a silverado interior at the local boneyard, got everything home and realized the cab I have has no trim or headliner. Is it possible to install these trim pieces and how much is involved. there are no holes or anything for the trim screws. did i just waste my money? :(
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19211
Re: jumped the gun
« Reply #1 on: April 12, 2011, 09:51:08 pm »
Just drill the holes (carefully)
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline onelow84

  • Registered Users
  • *
  • Posts: 113
Re: jumped the gun
« Reply #2 on: April 13, 2011, 05:47:49 am »
ok, gonna try and double side tape them in place to make sure it all lines up and is where I want it then drill all the holes. hopefully the double sided tape will help keep the ratles away too. thanks Vile!
Logged
Pages: [1]   Go Up
« previous next »