« previous next »
Pages: [1]   Go Down

Author Topic: Transferring parts  (Read 3630 times)

Offline Dirka

  • Newbie
  • Posts: 96
  • Newbie
Transferring parts
« on: July 28, 2012, 02:54:57 pm »
Hey guys quick question to clear up.
What engine modes can be installed on a 305 that would fit a 350? Carburetor, cylinder heads, intake manifold, exhaust headers, etc..??

Thanks!
Logged

Offline thirsty

  • Senior Member
  • ****
  • Posts: 1289
    • Suitor's Garage
Re: Transferring parts
« Reply #1 on: July 28, 2012, 05:07:20 pm »
All the above.
Logged
Real trucks are built, not bought Build thread

Give me a long enough lever and a place to stand, and I shall move the earth or break this bolt...Whatever, just hold my beer!

Offline Jason S

  • Senior Member
  • ****
  • Posts: 1561
Re: Transferring parts
« Reply #2 on: July 28, 2012, 09:11:22 pm »
Like Thirsty said "All the above."

 However, if you're building a 305, the heads that work very well with that engine may not work well with for a 350.  Same thing goes for the cam.  In other words: you may not want to dump a lot of money into heads and cam if you're future plans are for a 350 swap.
Logged
1973 GMC K2500, Super Custom, Camper Special, 350, TH350, NP203, 4.10's
1974 Chevrolet K10, Custom Deluxe, 350, SM465, NP203, 3.73's

"1) Peace through strength; 2) Trust but verify; 3) Beware of evil in the modern world"

Offline Dirka

  • Newbie
  • Posts: 96
  • Newbie
Re: Transferring parts
« Reply #3 on: July 29, 2012, 09:56:37 am »
Thanks guys!
I was just dissecting my VIN on the website, and found out the truck came with a 400 out of factory, so looks like I'll be searching for a 400 to swap in and that way it will be true to the vin, though not a numbers matching engine.
Logged

Offline Stewart G Griffin

  • Senior Member
  • ****
  • Posts: 3324
Re: Transferring parts
« Reply #4 on: July 29, 2012, 10:13:14 am »
Why?
Logged

Offline Dirka

  • Newbie
  • Posts: 96
  • Newbie
Re: Transferring parts
« Reply #5 on: July 29, 2012, 10:27:44 am »
Personal preference.  I'd like to be as true to original as I can in some aspects.
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18462
    • http://www.73-87chevytrucks.com
Re: Transferring parts
« Reply #6 on: August 01, 2012, 09:53:26 pm »
400SBC are going to be hard to find in rebuildable condition, they weren't used for many years and round trackers picked a lot of them up in the day.
Logged
Pages: [1]   Go Up
« previous next »