« previous next »
Pages: [1]   Go Down

Author Topic: Tach reading... 5000 or 10000?  (Read 3453 times)

Offline 86grannygear

  • Newbie
  • Posts: 9
  • Newbie
Tach reading... 5000 or 10000?
« on: July 23, 2013, 03:18:17 am »
Good evening all !

I have a 1986 Chevy c10 custom deluxe w/4 on the floor and am in need of a good aftermarket tach ... Can someone recommend what The HIGHEST RPM gauge I should get ... I see a lot of 10000 rpm gauges but have also noticed some stock gauges only read 5000 max rpm .

Thanks !
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Tach reading... 5000 or 10000?
« Reply #1 on: July 23, 2013, 11:22:58 am »
Unless you built a motor to go 10k I don't think you will go over 5 on a stock/mild motor. Most the tachs I see do go to 10k but its kind of over kill if you only do 4. Maybe its just me and my driving but even when I'm mudding I think i only reach 4k when I bounce off the roof and hit the gas.
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline KWKENUF

  • Newbie
  • Posts: 60
  • Newbie
Re: Tach reading... 5000 or 10000?
« Reply #2 on: July 24, 2013, 11:17:40 am »
I recently put in a 8k rpm tach.  With the way I drive my truck,  3k is about the most I really ever see.  To reiterate Irish,  10k is way overkill.
Logged

Offline Powerdriver1958

  • Newbie
  • Posts: 71
  • Kids Mechanic
Re: Tach reading... 5000 or 10000?
« Reply #3 on: August 01, 2013, 08:52:06 pm »
Most stock small Blocks will float the valves at 4,800 so 5,000 is plenty .
« Last Edit: August 01, 2013, 09:44:35 pm by Powerdriver1958 »
Logged
I Have My Grand Daughter Exactly Where She wants Me
Pages: [1]   Go Up
« previous next »