need lbs to torque upper control arms

[shaved80]

i replaced the L shaped piece that's on the front crossmember, and it holds the upper control arm. yes, the one that is riveted to the crossmember. how tight should i torque down that piece to the frame? there are 4 bolts. and how tight should i torque down the upper control arms?

[roundedline]

For the upper control arms they are 70 ft.lbs.

On the control arm bracket, I would probably have welded it back on, but...  I would say as tight as you can get it with some High strength bolts, 90ft.lbs maybe.

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project

[shaved80]

i meant the 4 bolts that hold it in from the factory, the ones against the frame not the crossmember

[roundedline]

I run them in with an air impact roughly 120ft.lbs.  Or tight

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project