« previous next »
Pages: [1]   Go Down

Author Topic: Tranny change  (Read 2444 times)

Offline duramaxman06

  • Newbie
  • Posts: 11
Tranny change
« on: April 07, 2014, 03:31:54 pm »
My truck came out with overdrive transmission now has turbo 350 what will I run into if I put overdrive back in
 


Sent from my iPhone using Tapatalk
Logged
Using Tapatalk

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Tranny change
« Reply #1 on: April 07, 2014, 04:08:05 pm »
More info on what you have for gear ratio, tire size and type of engine/ stock...  It all makes a difference as well as how you use it...
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18454
    • http://www.73-87chevytrucks.com
Re: Tranny change
« Reply #2 on: April 09, 2014, 09:36:26 pm »
Are you wanting to know what needs to be changed to do the swap?
move the crossmember mount, potentially a new drive shaft, trans and converter... short answer.
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Tranny change
« Reply #3 on: April 16, 2014, 12:03:54 am »
IF your th350 has the 9" tail shaft you can just put a 700r4 in its place with no new drive shaft. if its the 6 or 12 you can do the math you will be plus of minus 3" and you will need a new shaft. but both trans use 27 spline output shafts so you can reuse the old yoke
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes
Pages: [1]   Go Up
« previous next »