Vent windows, pt.2:

[Stewart G Griffin]

Not sure what happened the original post, but anyways are there any tips for removing the vent window from the frame?

[bake74]

      You should ask Chris what happened to the original post. 
      Here is a video on U-tube.   https://www.youtube.com/watch?v=WiZOiHmcb_w 
      It is for 67-72, but the process would be the same.  He does mention that fact in the video.

[Captkaos]

Are you trying to get the glass out or the frame or remove the vent assembly?
If Glass, is it broken or not?

[Stewart G Griffin]

i'm trying to get the vent window (glass only) out of the frame, not the whole assembly, but just the frame which is a compression type fit.

i got one from a "private junkyard" on tuesday.

[Stewart G Griffin]

Here's a real good video, if you get to 2:30 mins into the clip this is what i'm talking about:

https://www.youtube.com/watch?v=S8Ts2YzLInE

[Captkaos]

you will have to pry it out.

[DnStClr]

Yes. As Chris said-  it takes some pryin---The glass is installed in a gasket, which then is put into the vent frame. It sticks pretty well... you might have to bend the curvature of the frame out a bit to remove the glass.

[Stewart G Griffin]

i'm worried about cracking the glass.