« previous next »
Pages: 1 [2]   Go Down

Author Topic: Rocker Stud Screws wont stay put !  (Read 11466 times)

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6610
Re: Rocker Stud Screws wont stay put !
« Reply #15 on: November 20, 2014, 01:13:09 pm »
Via email from Mr. Gasket technical support on 11/20/14, "The Mr Gasket 1076 3/8-24 in. grade 8 studs would be torqued to 34 ft-lb with 30 wt oil."

So, you didn't overtighten the studs at 15 lb-ft.  The heads likely were already cracked and delivered that way.
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline sawblade6

  • Newbie
  • Posts: 13
Re: Rocker Stud Screws wont stay put !
« Reply #16 on: November 20, 2014, 04:05:57 pm »
I appreciate the info.
 
So I need new heads?
Logged
84 C10 350/700R4

Semper Fi

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6610
Re: Rocker Stud Screws wont stay put !
« Reply #17 on: November 20, 2014, 06:13:05 pm »
As previously stated, the rocker stud holes penetrate the water jacket.  I know of no repair procedure that I could confidently recommend.  Hence, I recommend replacement.  Will the engine builder provide any assistance?
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline sawblade6

  • Newbie
  • Posts: 13
Re: Rocker Stud Screws wont stay put !
« Reply #18 on: November 20, 2014, 09:57:02 pm »
Im still working with them.

I`ll post any updates. thank you for the assistance!
Logged
84 C10 350/700R4

Semper Fi
Pages: 1 [2]   Go Up
« previous next »