« previous next »
Pages: [1]   Go Down

Author Topic: Where to find cluster backing plate  (Read 8323 times)

Offline jumpkickyergunt

  • Newbie
  • Posts: 89
  • Newbie
Where to find cluster backing plate
« on: September 05, 2015, 06:29:06 pm »
I see   has the cluster backing plate for the 80's cluster. I have a 79 and I'm not sure what's going to work. Anyone that can get me in the right direction? Will the 80's version fit or do I have to do some digging?
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: Where to find cluster backing plate
« Reply #1 on: September 05, 2015, 08:22:35 pm »
Are you talking about the printed circuit?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline AZ87V10

  • Registered Users
  • *
  • Posts: 241
Re: Where to find cluster backing plate
« Reply #2 on: September 05, 2015, 09:56:34 pm »
I think he means the actual plastic housing that the gauges mount to. I saw new replacements for 50 something bucks but then they were discontinued unless they offer them again. As far as I know, the carriers are different for the 70's trucks versus the 80's trucks. I know the cluster bezels and certain gauges are. My best guess would be that they're not interchangeable and you'd have better luck either trying to repair your existing carrier or trying to find one in a salvage yard that's in better shape than yours.
« Last Edit: September 05, 2015, 10:55:17 pm by bd »
Logged
1987 Chevy V-10 Silverado short bed, 350TBI, 700R4, NP208, 3.73's, 31's
2001 Dodge Ram 1500 Laramie Quad Cab 4x4 short bed, 5.9L V8, Auto, 5 inch lift, 35's, 4.56's

Offline jumpkickyergunt

  • Newbie
  • Posts: 89
  • Newbie
Re: Where to find cluster backing plate
« Reply #3 on: September 05, 2015, 10:00:57 pm »
I'm referring to the cream colored plastic piece that the instrument lens and bezel screw into. The printed circuit is attached to the back side of the part I'm looking for.

I don't think I could repair it. It's been treated very poorly, unfortunately.
Logged

Offline AZ87V10

  • Registered Users
  • *
  • Posts: 241
Re: Where to find cluster backing plate
« Reply #4 on: September 05, 2015, 10:22:05 pm »
I see they offer it specifically for 83-87(91) trucks and offer for options either with clock/tach or without. They claim it's basically $60. Usually they're pretty accurate with their part descriptions as to what part will fit what. You know that our site has an online store? Maybe try browsing there and sending Chris (CaptKaos) an email? He's the site owner and could tell you whether he could get you one or not. My guess would be that nobody is reproducing them for your application and you'd be best off trying to find a salvage yard replacement. I know the backing plate in my truck has cracks and broken mounting tabs but it still fits and functions just fine. Maybe someone else with more knowledge on the subject will chime in? Just trying to help.
Logged
1987 Chevy V-10 Silverado short bed, 350TBI, 700R4, NP208, 3.73's, 31's
2001 Dodge Ram 1500 Laramie Quad Cab 4x4 short bed, 5.9L V8, Auto, 5 inch lift, 35's, 4.56's

Offline roundhouse

  • Senior Member
  • ****
  • Posts: 1474
  • Newbie
Re: Where to find cluster backing plate
« Reply #5 on: September 06, 2015, 05:03:14 pm »
A good Used one should be almost free
The gauges and printed circuit are what breaks


Sent from my iPhone using Tapatalk
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: Where to find cluster backing plate
« Reply #6 on: September 06, 2015, 07:57:46 pm »
Agreed, used ones are still plentiful
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline jumpkickyergunt

  • Newbie
  • Posts: 89
  • Newbie
Re: Where to find cluster backing plate
« Reply #7 on: September 07, 2015, 04:21:16 pm »
I wish I knew where everyone was hiding the free ones. I found one but the guy wants too much for it.
Logged
Pages: [1]   Go Up
« previous next »