Author Topic: Step side bed removal  (Read 3650 times)

Offline gwcrim

  • Registered Users
  • *
  • Posts: 182
  • Far from a Newbie
Step side bed removal
« on: January 31, 2017, 07:43:08 PM »
I think I'll take the bed off my truck.  The wood needs replaced and I want to lower the rear so I'm figuring that it will make both jobs easier if the bed is off.  I have an engine hoist that I'm going to use.  How should I lift the bed?  I've never removed a bed so this is new territory for me.

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18403
    • http://www.73-87chevytrucks.com
Re: Step side bed removal
« Reply #1 on: February 01, 2017, 02:29:58 PM »
On a stepside I just took the apart.

Chris Lucas
73-87chevytrucks.com
squarebody.biz


Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19114
Re: Step side bed removal
« Reply #2 on: February 01, 2017, 04:02:35 PM »
A couple buddies and a case of beer.
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline gwcrim

  • Registered Users
  • *
  • Posts: 182
  • Far from a Newbie
Re: Step side bed removal
« Reply #3 on: February 03, 2017, 06:29:32 PM »
It's pretty much ready to pull.  I didn't realize how light they are.  I'll get my boys to help lift it off.

I took 8 nuts off the 8 carriage bolts, unhooked the tail light harness and license plate light, and unscrewed the filler tube.

Anything else to look out for?

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19114
Re: Step side bed removal
« Reply #4 on: February 04, 2017, 07:32:35 AM »
The breather hose on the rear axle is usually attached to the underside of the bed.
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10