« previous next »
Pages: [1]   Go Down

Author Topic: I'm looking for the Screw & nut mirror mount 'A' parts,  (Read 3936 times)

Offline jntrndrm

  • Newbie
  • Posts: 14
  • Newbie
I'm looking for the Screw & nut mirror mount 'A' parts,
« on: July 18, 2020, 09:46:03 am »
Anyone know to get them?  These are the 3 mounts for the screws that fasten the mirror bracket to the door skin.
« Last Edit: July 19, 2020, 06:17:38 am by jntrndrm »
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7596
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: I'm looking for the Screw & nut mirror mount 'A' parts,
« Reply #1 on: July 18, 2020, 11:44:25 am »
You are going to have to ask the question so it makes sense.  For the life of me I have no idea what you are looking for???
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2735
  • Old Goof
Re: I'm looking for the Screw & nut mirror mount 'A' parts,
« Reply #2 on: July 18, 2020, 01:31:38 pm »
 :o
Logged
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction

Offline frotosride

  • Senior Member
  • ****
  • Posts: 1428
    • WFO CONCEPTS
Re: I'm looking for the Screw & nut mirror mount 'A' parts,
« Reply #3 on: July 20, 2020, 09:46:12 pm »
Quote from: jntrndrm on July 18, 2020, 09:46:03 am
Anyone know to get them?  These are the 3 mounts for the screws that fasten the mirror bracket to the door skin.

The top two bolt holes normally have 2 plastic inserts that are attached to the door, no nuts. The lower hole has a brace that is attached behind the door card on one end to the inside of the door the other end of the brace reaches to the outer skin and has a nut attached for the lower mount hole. Don't forget your gasket!
Logged
"Beat it like a red-headed ford"
1987 v10 Silverado(LQ4), 87 R10,83 K20, 83 cucv 6.2 Detroit
2006 Boulevard M109R 109 cid,2019 M109R BOSS
2009 Jeep XK, (future LS Swap)
GSXR 750 engine awaiting go kart

Offline MIKE S

  • Registered Users
  • *
  • Posts: 225
  • Member
Re: I'm looking for the Screw & nut mirror mount 'A' parts,
« Reply #4 on: July 20, 2020, 10:12:07 pm »
Most of the squarebody suppliers have them. Look online in the mirror section.
Logged

Online bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6610
Re: I'm looking for the Screw & nut mirror mount 'A' parts,
« Reply #5 on: July 20, 2020, 11:10:09 pm »
Google "jack nuts."  Use the type that is coated.  The coating functions as a seal.
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline frotosride

  • Senior Member
  • ****
  • Posts: 1428
    • WFO CONCEPTS
Re: I'm looking for the Screw & nut mirror mount 'A' parts,
« Reply #6 on: July 27, 2020, 11:32:27 pm »
Quote from: bd on July 20, 2020, 11:10:09 pm
Google "jack nuts."  Use the type that is coated.  The coating functions as a seal.

You will see a picture of 4 kids... Those are mine scroll down.
Logged
"Beat it like a red-headed ford"
1987 v10 Silverado(LQ4), 87 R10,83 K20, 83 cucv 6.2 Detroit
2006 Boulevard M109R 109 cid,2019 M109R BOSS
2009 Jeep XK, (future LS Swap)
GSXR 750 engine awaiting go kart

Offline Geezer77GMC

  • Newbie
  • Posts: 63
  • Newbie
Re: I'm looking for the Screw & nut mirror mount 'A' parts,
« Reply #7 on: July 28, 2020, 07:20:48 am »
Logged
Pages: [1]   Go Up
« previous next »