« previous next »
Pages: [1]   Go Down

Author Topic: 3"/5" drop  (Read 7199 times)

Offline 83HighSierra

  • Newbie
  • Posts: 96
3"/5" drop
« on: March 11, 2008, 10:36:55 pm »
over the past weekend my and a buddy of mine put a flip kit on his truck. tell me what ya think
3" in the front 5 in the back
Before...



After...

Logged

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: 3"/5" drop
« Reply #1 on: March 12, 2008, 06:51:37 am »
need to bring the front end down about an inch, kinda looks like the rear is loaded down. but overall, looks good
Logged
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline 78 BIG TEN

  • Newbie
  • Posts: 73
Re: 3"/5" drop
« Reply #2 on: March 12, 2008, 11:02:09 am »
Looks good. I agree on the one inch more in the front. What kit did you all use?
Logged
78 Big Ten, 350/350
Flowmaster..Edelbrock..MSD..Equus Gauges..Pioneer
93 Bonneville SSE
Flowmaster..CAI..HiFonics..Panasonic..Memphis 12's
00 Elantra
93 Cadillac Deville FOR SALE

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: 3"/5" drop
« Reply #3 on: March 12, 2008, 11:05:09 am »
Front needs to come down some more in my opinion too.
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: 3"/5" drop
« Reply #4 on: March 12, 2008, 02:10:10 pm »
Yes either bring it's rear up a lil or bring the nose down some more
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 1978Bonanza

  • Newbie
  • Posts: 52
Re: 3"/5" drop
« Reply #5 on: March 12, 2008, 03:41:32 pm »
Agreed. I would get another 1" drop for the front.
Logged

Offline HAULIN IT

  • Senior Member
  • ****
  • Posts: 1542
Re: 3"/5" drop
« Reply #6 on: March 12, 2008, 05:28:12 pm »
At least an inch, If it ended up 1 1/2" or so lower wouldn't be looking wrong In my opinion. I'm surprised it ended up that much different. There is an engine in it, isn't there? Even in the "before" picture, the front seems really high. What did you guys use in the front to lower it? Lorne
Logged

Offline 83HighSierra

  • Newbie
  • Posts: 96
Re: 3"/5" drop
« Reply #7 on: March 12, 2008, 09:12:40 pm »
the kit we used was doetsch. Yes the truck does have an engine in it. in the front we switched the stock springs with 3' lowering ones. The truck hasn't been driven (let alone sat in) since we did the drop. The front springs won't go lower once they are driven on? thats what we thought would happen
Logged

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: 3"/5" drop
« Reply #8 on: March 12, 2008, 09:36:05 pm »
Quote from: 83HighSierra on March 12, 2008, 09:12:40 pm
The truck hasn't been driven (let alone sat in) since we did the drop. The front springs won't go lower once they are driven on? thats what we thought would happen
It is possible that it will settle down a little once driven, I didn't take that into consideration. I have heard of this before, so I would try it before you buy more parts
Logged
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline 83HighSierra

  • Newbie
  • Posts: 96
Re: 3"/5" drop
« Reply #9 on: March 12, 2008, 09:55:27 pm »
Well its a buddy of mines and he just got the truck and doesn't even has his license yet, so there will no parts being bought. We just saw the flip kit laying in his garage and made a Saturday out of it.
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: 3"/5" drop
« Reply #10 on: March 13, 2008, 03:34:52 pm »
If it hasn't been driven, I will settle, but not that much over a week.  Are the springs seated correctly?
Logged

Offline 83HighSierra

  • Newbie
  • Posts: 96
Re: 3"/5" drop
« Reply #11 on: March 13, 2008, 08:35:05 pm »
ya they are seated correctly as far as i know.
Logged

Offline bigblock73

  • Junior Member
  • ***
  • Posts: 504
  • Yeller
Re: 3"/5" drop
« Reply #12 on: March 13, 2008, 09:40:34 pm »
Yup, front needs to come down more.  I don't think it will drop much once he drives it, and I wouldn't hack the 3" drop coils to achieve more drop.  I would have started with drop spindles or control arms...and used drop springs to "fine tune" it.

He could put a BB in it to achieve more drop.  :)
Logged
Jeff

'73 swb 2wd

73-87.com

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: 3"/5" drop
« Reply #13 on: March 14, 2008, 10:08:01 am »
Yeah, DEFINITELY don't cut 3" drop springs...
Logged

Offline 76 k10

  • Registered Users
  • *
  • Posts: 197
Re: 3"/5" drop
« Reply #14 on: March 16, 2008, 09:42:18 pm »
looks good if you want it to look bagged
Logged
Pages: [1]   Go Up
« previous next »