« previous next »
Pages: [1]   Go Down

Author Topic: efi for my 350  (Read 3568 times)

Offline cougarkiller

  • Newbie
  • Posts: 19
efi for my 350
« on: March 27, 2008, 06:40:23 pm »
who make a good conversion system for my 350 in an 85 c10. I need to get rid of thie junk edelbrock carb. Can i get a gm performance parts set up. please help. which system would give me more power.
Logged

Offline team39763

  • Senior Member
  • ****
  • Posts: 1194
Re: efi for my 350
« Reply #1 on: March 29, 2008, 03:48:04 pm »
I've seen TPI setups go for around $250 from third generation f-bodies.  Try ebay and craigslist.  I think Captkaos is doing TPI on one of his rides.  He could probably guide you as far as TPI setups.  Or there's that GM Performance Ramjet setup for a couple thousand bucks(in the SDPC catalog).  I hope that helps some.  Good luck with it.
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18454
    • http://www.73-87chevytrucks.com
Re: efi for my 350
« Reply #2 on: March 31, 2008, 03:33:11 pm »
What type EFI are you looking for?
If I was to do it over again, I would pay probably buy a complete kit all at once that has been gone through (if doing a TPI)
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19170
Re: efi for my 350
« Reply #3 on: March 31, 2008, 03:40:24 pm »
The best performance and fuel economy is going to come from sequential port fuel injection. The Cheapest way out is as suggested... a used TPI set up or a TBI system
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Pages: [1]   Go Up
« previous next »