Shaving the pinch weld seam

[Monzter]

I'm looking at removing the pinch weld seam ( the seam at the bottom of the rockers ) on my Suburban, just not sure how I want to go about doing it. If anybody has done this I'd like hear how you did it, some pics would be awesome.

[HAULIN IT]

Monzter, That would be quite an undertaking, not impossible by any means, just a time consuming operation. The best way would be to cut about 1" wide areas every 6" or so & weld the spot (to hold the two panels together) then go back & cut off the rest & tack in the middle & finish welding it up. Have Fun! Lorne