« previous next »
Pages: [1]   Go Down

Author Topic: Headers on a 4.3 V6  (Read 2731 times)

Offline three8six

  • Frequent Member
  • **
  • Posts: 486
Headers on a 4.3 V6
« on: January 02, 2009, 10:13:07 pm »
I got a set of Pace setter shorty's for a 96-98 C1500 with a 4.3 V6. I was successful in making them fit. I had to cut part of the accessory bracket on the driver's side of the engine. I also had to ball peen in one of the tubes the middle one on the passenger side. I hope this helps someone else out. I had asked this before on here and nobody had tried/done it.
Logged

Offline TexasRed

  • Junior Member
  • ***
  • Posts: 727
Re: Headers on a 4.3 V6
« Reply #1 on: January 02, 2009, 10:16:57 pm »
You got pictures of fitment and stuff? Thanks for letting us know too!
Logged

Offline three8six

  • Frequent Member
  • **
  • Posts: 486
Re: Headers on a 4.3 V6
« Reply #2 on: January 04, 2009, 07:02:12 pm »
No I wish I did but anybody with a ball peen hammer, and a die grinder could do it. I'm definetely not a mechanic and I got it to work. Also you're stock flanges won't meet up. I'm not sure of anybody who keeps their stock exhaust with headers though.
Logged
Pages: [1]   Go Up
« previous next »