Author Topic: 87 SBC accessories layout?  (Read 9141 times)

Offline Gearhead1

  • Newbie
  • Posts: 87
  • Its not much, but its all I've got
87 SBC accessories layout?
« on: January 19, 2009, 09:22:29 pm »
I'm putting a '95 5.7 TBI into my '87 SWB. Stupid me...threw out the 305 TBI that was in it. This project has been mothballed for a few years, so I've lost track of what went where etc..To make matters worse, I dont seem to have or remember there being an air pump, but the hatnes manual says there should be one.

Does anyone have a link of where I could find an illustration or photo of the accessory configuration on these engines? Would anyone have a photo of an '87 engine bay they could share?

Thanks in advance
Gear 

Offline frogman68

  • Junior Member
  • ***
  • Posts: 773
Re: 87 SBC accessories layout?
« Reply #1 on: January 20, 2009, 03:45:20 am »
Got a 88 out side if that will help

Passenger side top has ALT below that is the AIR Pump

Driver side I am not 100 percent on havent worked on that side :) Ac on top Power steeting bottom

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18467
    • http://www.73-87chevytrucks.com
Re: 87 SBC accessories layout?
« Reply #2 on: January 20, 2009, 12:22:51 pm »
Top one is a 87-91, bottom is 92-95 serpentine

Offline Gearhead1

  • Newbie
  • Posts: 87
  • Its not much, but its all I've got
Re: 87 SBC accessories layout?
« Reply #3 on: January 20, 2009, 01:44:54 pm »
Thanks guys. Neither photo looks familliar though. The alt bracket indicates it can only go on the passenger side. The hoses on the steering pump indicates that it goes on the drivers side. I'm unclear as to what I'm missing for the air pump assy or if there was an idler. This truck doesnt have AC, the sepentine belt is narrower and has one groove less than the '95 (So I'll have to change the alt pulley I guess) The power steering pump uses a standard v-belt.

Frogman, you wouldnt have a pic would you?

Thanks very much guys. (If I had access to an '87, I'd just ask to take a peek of course)

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18467
    • http://www.73-87chevytrucks.com
Re: 87 SBC accessories layout?
« Reply #4 on: January 20, 2009, 02:05:07 pm »
Is yours a compromise of a V-belt and a serpentine?  If so I have that on my pickup.  It actually isn't a "serpentine" setup.

Why can't you use the setup on the 94?  It is a much better setup.

Offline frogman68

  • Junior Member
  • ***
  • Posts: 773
Re: 87 SBC accessories layout?
« Reply #5 on: January 20, 2009, 03:06:05 pm »
Here ya go its not the greatest but with all the stuff in there its kinda hard


Offline Gearhead1

  • Newbie
  • Posts: 87
  • Its not much, but its all I've got
Re: 87 SBC accessories layout?
« Reply #6 on: January 21, 2009, 07:00:12 am »
Perfect, thanks Frogman!

Capt, I guess I could, but I wasnt sure if I could get a belt size to work. (95 had AC which is gone now) Do you know if a 95 air pump will work with the harness / comp (prom?) in the '87?

Thanks alot guys!

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18467
    • http://www.73-87chevytrucks.com
Re: 87 SBC accessories layout?
« Reply #7 on: January 21, 2009, 11:11:16 am »
Should work fine.  did your 87 have an air pump?  Does the 94 have it?

Offline DnStClr

  • Senior Member
  • ****
  • Posts: 1806
Re: 87 SBC accessories layout?
« Reply #8 on: January 21, 2009, 01:49:08 pm »


Don
87 Chevy Silverado

Offline DnStClr

  • Senior Member
  • ****
  • Posts: 1806
Re: 87 SBC accessories layout?
« Reply #9 on: January 21, 2009, 01:54:08 pm »
Those pics aren't my engine, but I thought they might  help a little.
Don
Don
87 Chevy Silverado

Offline Gearhead1

  • Newbie
  • Posts: 87
  • Its not much, but its all I've got
Re: 87 SBC accessories layout?
« Reply #10 on: January 22, 2009, 08:10:11 am »
Capt; I honestly dont remember if the 87 had one. I dont have an air pump for either...must have had a brain fart and scrapped it with the donor truck....duh me.

Thanks for the photos Don

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: 87 SBC accessories layout?
« Reply #11 on: January 22, 2009, 08:51:15 am »
I thought the airpump went away when the tbi came in ???
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline 78 Chevyrado

  • Z62 ON-ROAD
  • Site Supporters
  • Senior Member
  • ******
  • Posts: 2748
    • My Photobucket Site
Re: 87 SBC accessories layout?
« Reply #12 on: January 22, 2009, 10:06:45 am »
My old '87 didn't have one when I got it, nor show any signs of ever having had one like exhaust manifolds with the air tubes or brackets, etc.  It did however have an extra place for a belt on the front of the water pump pulley.
Kenny

1978 C-20, 350/400, 3.73, Graystone Metallic, Raceline Renegade 8 Wheels - 18x8.5, 275/70R18 BFG KO's

Offline Gearhead1

  • Newbie
  • Posts: 87
  • Its not much, but its all I've got
Re: 87 SBC accessories layout?
« Reply #13 on: January 22, 2009, 02:50:51 pm »
Sheesh...I never concidered there was never one to begin with....I AM QUITE POSSIBLY RETARDED!!!!
 :-[ :-[ :-[
Come to think of it, the exhaust manifolds didnt have those little tubes.....I'm an idiot. (hanging my head in shame)

Thanks for the picks of the alternator details though.