« previous next »
Pages: [1]   Go Down

Author Topic: power window regulator  (Read 7260 times)

Offline p7387

  • Frequent Member
  • **
  • Posts: 254
power window regulator
« on: March 30, 2009, 01:10:58 am »
is the passanger side power window regulator the same for chevy and GMC throughout 73-87 or are there some differences?

thank you
Logged

Offline p7387

  • Frequent Member
  • **
  • Posts: 254
Re: power window regulator
« Reply #1 on: March 30, 2009, 01:29:27 am »
one other thing..
what is your opinion on retrofitting a manual window to electric. would you be better off getting original power regulators from a junk yard or going with an aftermarket kit?
which is more reliable?

thank you
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: power window regulator
« Reply #2 on: March 30, 2009, 02:05:37 am »
i think the year they changed up is 76 so 73-76 should be the same and 77-87 91 should also be the same
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18471
    • http://www.73-87chevytrucks.com
Re: power window regulator
« Reply #3 on: March 31, 2009, 03:35:05 pm »
There was no power window prior to 1977 and motors changed in 1981, but the components will still switch on the 77-87(91) setups.
I have converted a few from manual to power and vice versa.
Logged

Offline the_legend_1981

  • Frequent Member
  • **
  • Posts: 288
Re: power window regulator
« Reply #4 on: March 31, 2009, 03:36:51 pm »
its pretty easy to switch them over
Logged
Pages: [1]   Go Up
« previous next »