« previous next »
Pages: [1]   Go Down

Author Topic: door wiring hole location  (Read 3174 times)

Offline Nick Magnum

  • Newbie
  • Posts: 14
door wiring hole location
« on: April 25, 2009, 11:46:59 am »
I added power window doors to my truck and they have the accordian rubber boot with the plate that rivets to the body. I need a location of where to drill the hole. Can anyone give me measurements from maybe the interior light pin to the rivet locations? thanks in advance, Nick
Logged

Offline 78 Chevyrado

  • Z62 ON-ROAD
  • Site Supporters
  • Senior Member
  • ******
  • Posts: 2748
    • My Photobucket Site
Re: door wiring hole location
« Reply #1 on: April 25, 2009, 08:29:04 pm »
Look on the front end of the door and on the pillar in the general aren where it should go.  There will be 3 dimples, a center hole and the locations for the bolt holes.  I used the center dimple for my aftermarket looms.
Logged
Kenny

1978 C-20, 350/400, 3.73, Graystone Metallic, Raceline Renegade 8 Wheels - 18x8.5, 275/70R18 BFG KO's

Offline fitz

  • Senior Member
  • ****
  • Posts: 2085
Re: door wiring hole location
« Reply #2 on: April 26, 2009, 08:14:37 pm »
It's 1.5" from the top of the dome light switch to the top of the boot. This pic isn't great but hopefully it helps.
Logged

Offline Nick Magnum

  • Newbie
  • Posts: 14
Re: door wiring hole location
« Reply #3 on: April 28, 2009, 02:20:57 pm »
thanks guys, that helped alot. power window time! got one door done, not I have to fab up a harness to the other side
Logged
Pages: [1]   Go Up
« previous next »