« previous next »
Pages: [1]   Go Down

Author Topic: 82 SWB Project starting in 3 weeks!  (Read 7031 times)

Offline trem0r

  • Newbie
  • Posts: 19
  • Information Technology Engineer
82 SWB Project starting in 3 weeks!
« on: June 04, 2009, 01:31:45 am »
Hello everyone,

Here are a bunch of pics of a project that I will be starting in approximately three weeks time.  I plan on working in the evenings as time permits and quite a bit on the weekends.
Logged

Offline trem0r

  • Newbie
  • Posts: 19
  • Information Technology Engineer
Re: 82 SWB Project starting in 3 weeks!
« Reply #1 on: June 04, 2009, 01:32:56 am »
more...
Logged

Offline trem0r

  • Newbie
  • Posts: 19
  • Information Technology Engineer
Re: 82 SWB Project starting in 3 weeks!
« Reply #2 on: June 04, 2009, 01:34:25 am »
more..
Logged

Offline trem0r

  • Newbie
  • Posts: 19
  • Information Technology Engineer
Re: 82 SWB Project starting in 3 weeks!
« Reply #3 on: June 04, 2009, 01:35:55 am »
Most of the rust is surface except the spot right behind the door where the hand is visible.  That was the biggest spot of damaging rust, and there is another on the opposite side of the truck, but much smaller.
Logged

Offline trem0r

  • Newbie
  • Posts: 19
  • Information Technology Engineer
Re: 82 SWB Project starting in 3 weeks!
« Reply #4 on: June 04, 2009, 01:37:35 am »
I've purchased a GM service manual for the 1982 c10-30 series light duty trucks from Ebay.  Someone recommended checking there, and viola!  Cost me around $50 but after looking through it, it was WELL worth it, IMO.
Logged

Offline trem0r

  • Newbie
  • Posts: 19
  • Information Technology Engineer
Re: 82 SWB Project starting in 3 weeks!
« Reply #5 on: June 04, 2009, 01:43:14 am »
Correction:

The rust spot is behind the drivers side rear door.  Sorry, it's late  ;)
Logged

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: 82 SWB Project starting in 3 weeks!
« Reply #6 on: June 04, 2009, 06:37:26 am »
Whats your plans for a front bumper, roll pan, original or newer (83-up)? I should have an 81-82 bumper ts just a matter of locating it.
Logged
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline trem0r

  • Newbie
  • Posts: 19
  • Information Technology Engineer
Re: 82 SWB Project starting in 3 weeks!
« Reply #7 on: June 04, 2009, 12:42:22 pm »
My plan is to replace it as I would imagine that it would cost more to rechrome than to replace.
Logged

Offline oldwhity

  • Senior Member
  • ****
  • Posts: 1037
Re: 82 SWB Project starting in 3 weeks!
« Reply #8 on: June 04, 2009, 08:00:57 pm »
Looks like it would be a great project. Been in the family for years and appears to be unmolested.
Logged
Rob G.
81 Chevy K20 4x4 LWB stepside
I enjoy long quiet walks..........in a junkyard!

Offline trem0r

  • Newbie
  • Posts: 19
  • Information Technology Engineer
Re: 82 SWB Project starting in 3 weeks!
« Reply #9 on: June 04, 2009, 11:31:34 pm »
Heck yeah, I'm totally psyched.  Looking for crate engines at the moment.  Was thinking longblock 350 or turnkey 350.  Any ideas, links, prefs, recommendations?
Logged
Pages: [1]   Go Up
« previous next »