« previous next »
Pages: [1]   Go Down

Author Topic: Clearance light help  (Read 7206 times)

Offline 4x4HighSierra

  • Newbie
  • Posts: 40
  • Sqaure body stud
Clearance light help
« on: January 27, 2010, 08:44:43 pm »
I was looking at getting some cab lights for my GMC K10 and dont know wether to buy a kit or lights seperately.  And would also like to know how to install them.  I already know how to splice into my wiring harness to give them power but would like to know how to fasten them to the roof and how to run the wiring.
Logged
1985 GMC High Sierra K10 mild 350 and rebuilt 700R4 with transgo shift kit

1985 GMC Sierra Classic C10 TPI 350 swapped in and 700R4 and 6 inch drop, with front drop spindles and a axle flip in the back and c notched frame

1995 Chevy Tahoe LT stock

Offline Lt.Del

  • Andy aka:SgtDel
  • Senior Member
  • ****
  • Posts: 3864
  • DelbridgePhotography.com
    • www.delbridge.net
Re: Clearance light help
« Reply #1 on: January 27, 2010, 09:26:32 pm »
by the way welcome from Virginia!
let's see pics of the truck!

check out a moonvisor by Lund. Already has lights.  (don't show Vile)

http://lundinternational.com/PartDetail.aspx?partno=19009&mmcode=1030936&catcode=LUN


Logged

Offline 4x4HighSierra

  • Newbie
  • Posts: 40
  • Sqaure body stud
Re: Clearance light help
« Reply #2 on: January 27, 2010, 10:18:28 pm »
Logged
1985 GMC High Sierra K10 mild 350 and rebuilt 700R4 with transgo shift kit

1985 GMC Sierra Classic C10 TPI 350 swapped in and 700R4 and 6 inch drop, with front drop spindles and a axle flip in the back and c notched frame

1995 Chevy Tahoe LT stock

Offline 4x4HighSierra

  • Newbie
  • Posts: 40
  • Sqaure body stud
Re: Clearance light help
« Reply #3 on: January 27, 2010, 10:21:06 pm »
thats my truck but it has a different grill now and has headlight bezels.  And i just made some bumpers for it that are user friendly. I will put some current pics of it on soon.
Logged
1985 GMC High Sierra K10 mild 350 and rebuilt 700R4 with transgo shift kit

1985 GMC Sierra Classic C10 TPI 350 swapped in and 700R4 and 6 inch drop, with front drop spindles and a axle flip in the back and c notched frame

1995 Chevy Tahoe LT stock

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Clearance light help
« Reply #4 on: January 28, 2010, 05:47:07 am »
As far as installing them you need to hole saw 5 holes in your roof, then drill 10 holes one on each side of the holes to screw them down. You will need to run a wire down from them inside the A pillar to your head light switch. I am not sure if GM still offers the lights but they are available after market.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18468
    • http://www.73-87chevytrucks.com
Re: Clearance light help
« Reply #5 on: January 28, 2010, 05:52:11 pm »
Logged

Offline 4x4HighSierra

  • Newbie
  • Posts: 40
  • Sqaure body stud
Re: Clearance light help
« Reply #6 on: February 01, 2010, 12:00:18 am »
How hard is it to get the wires fished down the through the roof and a pillar  ???
Logged
1985 GMC High Sierra K10 mild 350 and rebuilt 700R4 with transgo shift kit

1985 GMC Sierra Classic C10 TPI 350 swapped in and 700R4 and 6 inch drop, with front drop spindles and a axle flip in the back and c notched frame

1995 Chevy Tahoe LT stock

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: Clearance light help
« Reply #7 on: February 01, 2010, 12:55:49 am »
I have installed cab lights on trucks at my old employer and we just ran the wires between the roof and headliner and pillar cover. Not sure what to do if you dont have those.
Logged

Offline frito-bandito

  • Registered Users
  • *
  • Posts: 181
  • Hillbilly Deluxe
Re: Clearance light help
« Reply #8 on: February 01, 2010, 12:53:27 pm »
Quote from: beastie_3 on February 01, 2010, 12:55:49 am
I have installed cab lights on trucks at my old employer and we just ran the wires between the roof and headliner and pillar cover. Not sure what to do if you dont have those.


That's a good question because when I was in high school, I installed cab lights in my 1987 F#@% F250 which didn't have a headliner and I couldn't figure out how to fish the wires across the roof to the A pillar. Long story short, I had wires that were visible inside the truck... dumb kids, LOL!
Logged
1981 Chevy dually 350 4spd. (One piece at a time)
1994 GMC C1500 4.3L 4L60E. (340K Daily Driver/Resto-Mod)
1998 GMC C1500 5.0L 4L60E (179K Daily Driver)

Offline big trucker

  • Newbie
  • Posts: 5
Re: Clearance light help
« Reply #9 on: February 01, 2010, 10:59:16 pm »
take your sun visor off the driver side and you can fish the wire inside the a post the roof is doubled so you can hide everthing you should have a whole under the dash above the e brake pedal to fish the wires out to the headlight switch
Logged
Pages: [1]   Go Up
« previous next »