Author Topic: Redneck needs!  (Read 3574 times)

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Redneck needs!
« on: February 07, 2010, 08:23:23 pm »
Washing machine, and some cord wood!  ???

Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline 4x4orbust

  • Frequent Member
  • **
  • Posts: 342
Re: Redneck needs!
« Reply #1 on: February 07, 2010, 09:34:11 pm »
thats the beginning of a home built wood stove right there!! :P
1982 chevy K-10 SWB, 355 th350/np208. 2.5"lift, 33" swampers, headers/duals,  current project

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: Redneck needs!
« Reply #2 on: February 07, 2010, 09:38:04 pm »
Aw shucks, thats easy. Cord wood is cheaper than blocks, he's gotta have something to sit it on while he uses the washer for patch panels. They are the same color so he doesnt even have to paint it when he's done.
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: Redneck needs!
« Reply #3 on: February 08, 2010, 05:33:56 pm »
 Naw hes going to make corn chowder.
 
He'll take the stainless drum from the washer and weld up the hole in the center. Steal the rain barrel from the guy next door (55 gal drum) cut half of the bottom side of the drum so as to have excess to build a fire in it, drop the washer drum in the top of the rain barrel(just fits, the lip holds it in) throw in your favrote fixins start the fire and 12 hrs later corn chowder.
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears

92' GMC C-1500 454/4L80E/14 bolt

Offline cjizzz

  • Newbie
  • Posts: 8
Re: Redneck needs!
« Reply #4 on: February 08, 2010, 09:48:50 pm »
Naw hes going to make corn chowder.
 
He'll take the stainless drum from the washer and weld up the hole in the center. Steal the rain barrel from the guy next door (55 gal drum) cut half of the bottom side of the drum so as to have excess to build a fire in it, drop the washer drum in the top of the rain barrel(just fits, the lip holds it in) throw in your favrote fixins start the fire and 12 hrs later corn chowder.

sounds like you have done it a few times lol
'74 Cheyenne 350/350 project

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: Redneck needs!
« Reply #5 on: February 09, 2010, 05:59:26 am »

sounds like you have done it a few times lol

 Thats right
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears

92' GMC C-1500 454/4L80E/14 bolt

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Redneck needs!
« Reply #6 on: February 09, 2010, 09:23:07 pm »
I know the guy! He came into the shop today, I asked him about his payload while I was behind him the other day. He had to put a new dryer in his girl friends place, and while he was at it he figure why waste a trip with a 3/4 empty truck? Go to the landing, ( his step father is a logger ) and pick up a load of wood!Good thinkin I guess!
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline bobcooter

  • Junior Member
  • ***
  • Posts: 788
  • 1979 Scottsdale C-20
Re: Redneck needs!
« Reply #7 on: February 11, 2010, 12:11:17 pm »
Jeff Foxworthy was right! There are Rednecks everywhere! LOL!
'79 C-20, 350/400, 3:73 gears, 9 leafs and a headache rack
Favorite Quote, "Good judgement comes from experience. Experience comes from poor judgement."