« previous next »
Pages: [1]   Go Down

Author Topic: sm465 bellhousing for a nv4500  (Read 6882 times)

Offline heavychevy

  • Newbie
  • Posts: 22
sm465 bellhousing for a nv4500
« on: February 21, 2010, 10:32:58 pm »
will a bell housing of an 86 sm465 work on my 93 nv4500
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: sm465 bellhousing for a nv4500
« Reply #1 on: February 22, 2010, 02:08:30 am »
whats wrong witht he nv4500 case?
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: sm465 bellhousing for a nv4500
« Reply #2 on: February 22, 2010, 04:15:40 am »
the nv4500 in 93-95 used the same bolt pattern as the 465 so no mater what your good but the nv4500 bell housing will bolt up to and sbc but... i don't know if you have to mod anything
« Last Edit: February 22, 2010, 05:00:05 am by Irish_Alley »
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline frito-bandito

  • Registered Users
  • *
  • Posts: 181
  • Hillbilly Deluxe
Re: sm465 bellhousing for a nv4500
« Reply #3 on: February 22, 2010, 10:37:20 am »
I think the trans to bell housing bolt pattern is different on a 465 and a 4500, but I'm not positive.
Logged
1981 Chevy dually 350 4spd. (One piece at a time)
1994 GMC C1500 4.3L 4L60E. (340K Daily Driver/Resto-Mod)
1998 GMC C1500 5.0L 4L60E (179K Daily Driver)

Offline heavychevy

  • Newbie
  • Posts: 22
Re: sm465 bellhousing for a nv4500
« Reply #4 on: February 22, 2010, 07:56:09 pm »
just wanted to put my slave cylinder on drivers side so i can do my sas later on ,or just have it as a spare its free so i will take it if it will fit
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18471
    • http://www.73-87chevytrucks.com
Re: sm465 bellhousing for a nv4500
« Reply #5 on: February 22, 2010, 09:27:26 pm »
AFAIK they will work.
Logged
Pages: [1]   Go Up
« previous next »