« previous next »
Pages: [1]   Go Down

Author Topic: frames  (Read 7237 times)

Offline HeAvYChEvY!

  • Newbie
  • Posts: 73
  • DoWnWiTdAsIcKnEsS!
    • HeAvYChEvY!
frames
« on: April 20, 2010, 07:44:55 pm »
are there any differences between a 1979  gmc and chevy frame ?
Logged

Offline bgctrading

  • Newbie
  • Posts: 82
Re: frames
« Reply #1 on: April 20, 2010, 08:10:54 pm »
Shouldnt be.
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: frames
« Reply #2 on: April 21, 2010, 01:09:31 am »
theres one big difference the the Chevy frame will have the Chevy Vin on it while the gmc will have the gmc Vin on it  ::) as long as they are both from 79 then your good
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline HeAvYChEvY!

  • Newbie
  • Posts: 73
  • DoWnWiTdAsIcKnEsS!
    • HeAvYChEvY!
Re: frames
« Reply #3 on: April 21, 2010, 10:02:04 am »
Quote from: Irish_Alley on April 21, 2010, 01:09:31 am
theres one big difference the the Chevy frame will have the Chevy Vin on it while the gmc will have the gmc Vin on it  ::) as long as they are both from 79 then your good
IF IM BUILDING A CUSTOM FRAME AND I HAVE THE VIN NUMBER ON THE CAB REGISTERED, WILL THIS BE A PROBLEM?
Logged

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: frames
« Reply #4 on: April 21, 2010, 10:59:43 am »
Check with your dmv or troopers. If they say there is a problem, ask to see the vehicle code on it.

You also might have a safety issue within the law about it.
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: frames
« Reply #5 on: April 21, 2010, 05:49:13 pm »
Don't even worry about that number you can't read it with out getting up and under the truck and then its all Rusty so no one even looks at them. They "cops" usually just look at the dash Vin then if you have a ahole cop he will try to open the door to look at the Vin on the door with out asking or telling you and you are leaning on it then you have to catch your self from falling lol another story. Silly new state cops
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline KY..Rob

  • Registered Users
  • *
  • Posts: 185
Re: frames
« Reply #6 on: April 22, 2010, 09:29:18 pm »
Where is this VIN number located on the frame? I have been wondering what year my frame is, I think it's a 80-81 But this is the info I have been looking for.

Rob..
Logged

Offline 80stepsideguy

  • Senior Member
  • ****
  • Posts: 1389
Re: frames
« Reply #7 on: April 25, 2010, 12:44:33 am »
I beleive the vin is near the steering box area..

thanks
pat

p.s. if its a 80 its got the older cab/radiator supports. 
Logged
1980 Chevy c10 restomod:  350/700r4 12 bolt 3.73 rearend iris blue metallic
1998 Chevy 1500 S/B 2wd
1970 cougar convertible: triple white 1 of 1
1931 Ford Model A roadster(family inherited)
2014 Hyundai Tucson Limited(my daily driver)
2023 Kia Sportage X Pro (her daily driver).

Offline KY..Rob

  • Registered Users
  • *
  • Posts: 185
Re: frames
« Reply #8 on: April 26, 2010, 10:52:00 pm »
Thanks Pat, I'll do some spelunking with a wire brush and see whats under there!

Rob..
Logged

Offline HeAvYChEvY!

  • Newbie
  • Posts: 73
  • DoWnWiTdAsIcKnEsS!
    • HeAvYChEvY!
Re: frames
« Reply #9 on: May 07, 2010, 03:25:07 pm »
Okay well i bought the frame. now im going to start  building it? can any of you ttell me a ballpark figure of how much powdercoating cost. im going to do the whole frame and all of the suspension components!
Logged

Offline bgctrading

  • Newbie
  • Posts: 82
Re: frames
« Reply #10 on: May 07, 2010, 04:35:13 pm »
I am having one done right now just the frame and he said sand blasting the frame and powdercoating would be about $350 bucks.
Logged

Offline slammed79

  • Senior Member
  • ****
  • Posts: 1367
  • Thou shalt not drive stock
Re: frames
« Reply #11 on: May 07, 2010, 10:33:03 pm »
If you get the suspension done too the tack another 150 on to it.
Logged
74 C10 Long bed 350/SM465 Lowered on 20's

Praise the lowered
Pages: [1]   Go Up
« previous next »