Power steering brackets for BB in my '83..HELP

[thebabybrahma]

I need some help with my power steering brackets.. We are putting a 402BB in my '83 GMC. Are these the right brackets. I thought we had all we needed but I think we will need to buy some more. I have attached pics of the p/s pump and brackets. Need some help to get this assembled.  If anyone has any pics or info, please share.

[ccz145a]

It's hard to see what's on the front of the pump now, but it does not look right (second pic) . All you need is the brackets in pic 1 and 3 and 2 3/16" or 1/4" spacers for the front backet. You'll have to get the pulley off and replace the bracket on there with the one from pic 3 and the spacers. Then that will nestle right in with the backet in pic 1.

clear as mud

[thebabybrahma]

so, i have a small block bracket on the pump now and just need to swap on the bb bracket and make a spacer... thanks for the info, pics would be great

[ccz145a]

sorry, never was able to get a good pic of the assembly, It's impossibe to see with the A6 compressor right on top. Hope someone else can help.

A couple of washers may be all the space you need, just need to watch the pulley clearance.