Author Topic: 81 k10 15x10 Question  (Read 5729 times)

Offline hubb10

  • Newbie
  • Posts: 7
81 k10 15x10 Question
« on: August 01, 2010, 11:14:06 pm »
Hello all, I am wondering about putting some 15x10 rims all around on my 81 k10. It is currently stock height, I am planning on putting a 2" suspension lift eventually but am curious what tire size would fill up the wheel well the best with no rubbing. Or are 15x10s just out of the question on all 4 for rubbing? Tried to find a post with pic's or some info on it but couldn't find any. Any insight would be great. Thanks

Offline fitz

  • Senior Member
  • ****
  • Posts: 2085
Re: 81 k10 15x10 Question
« Reply #1 on: August 02, 2010, 08:04:40 am »
I installed 2" add a leafs all around in my 88 blazer with 15 x 10 rims and 33 x 12.50 tires and the fronts rubbed at full lock.
I could have trimmed the front fenders but I went with a 4" lift to solve the problem.

Offline hubb10

  • Newbie
  • Posts: 7
Re: 81 k10 15x10 Question
« Reply #2 on: August 02, 2010, 08:15:04 pm »
Hey thanks for the reply man. Do you have a pic of that by chance?

Offline BigHemi353

  • Registered Users
  • *
  • Posts: 235
  • Diesel Enthusiast
Re: 81 k10 15x10 Question
« Reply #3 on: August 03, 2010, 05:00:10 pm »
2in lift and 31's on 15x10's

-1986 Silverado K-20 6bt Cummins / NV4500/ np205- under construction

Offline 4x4orbust

  • Frequent Member
  • **
  • Posts: 342
Re: 81 k10 15x10 Question
« Reply #4 on: August 03, 2010, 05:57:14 pm »
i have 33x12.5's on my 82 k-10 on 15x10's.  it rubbed a little at full lock, and when flexing, so i trimmed the fenders a little.   with the old 32x11.5's it didn't rub at all. 
1982 chevy K-10 SWB, 355 th350/np208. 2.5"lift, 33" swampers, headers/duals,  current project