Bagged and Exhaust

[k5chevyblazer]

I just picked up a 75 2wd K5. Future plans are for a bagged suspension. But right now the exhaust needs to be addressed. I will be replacing the entire exhaust. As far as headers go, can I run the rear dump style with out ground scraping interference?
http://www.summitracing.com/parts/SUM-G9006-9/

[beastie_3]

I dont know if those headers will end below the frame. My Thorley headers do. As long as the exhaust is above the bottom of the frame, you shoudnt have a scraping issue. If you can, wait until you bag it then do the exhaust.

[k5chevyblazer]

I wish I could. It still has the original 1975 cat in it and a horrible exhaust leak. I will run it by my exhaust guy and see what he thinks.

[Captkaos]

Most full length headers will hang below the frame, there is a post in the tech section headers for lowered trucks.

[k5chevyblazer]

man, you sure do know your way around your site, thanks  :beer:

http://forum.73-87chevytrucks.com/smforum/index.php?topic=1943.0

[beastie_3]

Thats kinda what happens when the site is his....

[76 k10]

when i had my 86 c10 it was bagged and i ran hooker comps with 2 1/2 colletor and it was fine