« previous next »
Pages: [1]   Go Down

Author Topic: Clear coat  (Read 2335 times)

Offline Tazman

  • Junior Member
  • ***
  • Posts: 774
Clear coat
« on: September 10, 2010, 10:48:11 pm »
The paint on the passenger side has the clear coat coming through.I have been told that a person can wet sand the clear coat off and re cover it with new clear coat.Is this possible and how is it done.Thanks
Logged
Proud of and proud to be a veteran of our military.
God BLESS AMERICA

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Clear coat
« Reply #1 on: September 11, 2010, 07:46:16 am »
If the clear is worn through or peeling it needs to be refinish. It may look shiny after wet sanding, and re clearing, but it will not look like it should.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline rroeder96

  • Newbie
  • Posts: 64
Re: Clear coat
« Reply #2 on: September 11, 2010, 09:21:06 pm »
clear coat is very easy to do yourself with the right spray gun wet sand with 600 grit paper to break the surface just tape up your windows and areas you dont wont to be hit with clear go about a foot past the bad spot and feather your clear coat into it after 3 coats wet sand with 1200 grit and buff and you should have a good lookin finish hope this helps....
Logged
Pages: [1]   Go Up
« previous next »