« previous next »
Pages: [1]   Go Down

Author Topic: which sending unit?  (Read 3101 times)

Offline Gearhead1

  • Newbie
  • Posts: 87
  • Its not much, but its all I've got
which sending unit?
« on: September 13, 2010, 07:42:53 am »
I'm doing a blazer tank conversion on my SWB and wondering why the blazer unit have 4 outlets instead of the 3? Assuming; 1 supply, 1 return, 1 vent to filler neck...what's the fourth one for? I've had this truck apart for too long...

Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: which sending unit?
« Reply #1 on: September 13, 2010, 08:56:20 am »
Hold up lol
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Gearhead1

  • Newbie
  • Posts: 87
  • Its not much, but its all I've got
Re: which sending unit?
« Reply #2 on: September 13, 2010, 09:49:00 am »
??
seriously...I need to start putting a list of things together to get this truck running again.
Before I finish fabbing the tank, I need to know which sending unit I need to use. I dont have a blazer unit, only the 3 outlet form my pickup tank

help :(
Logged

Offline DnStClr

  • Senior Member
  • ****
  • Posts: 1806
Re: which sending unit?
« Reply #3 on: September 13, 2010, 03:40:57 pm »
The 3/8" line is for gas going out to the carb.
      5/16 "    is for gas return to the tank.
      1/4 "      is for a fuel vapor line (breather) oops- this might also be a 5/16" line.
      5/8 "     is for a filler vent hose.
« Last Edit: September 13, 2010, 03:45:56 pm by DnStClr »
Logged
Don
87 Chevy Silverado

Offline Gearhead1

  • Newbie
  • Posts: 87
  • Its not much, but its all I've got
Re: which sending unit?
« Reply #4 on: September 13, 2010, 03:43:37 pm »
Thanks DN...so I can use either a 4 port or a 3 port unit as long as I provide a fitting on my tank for the 5/8" filler hose vent.

Sweet
« Last Edit: September 13, 2010, 03:48:17 pm by Gearhead1 »
Logged
Pages: [1]   Go Up
« previous next »