« previous next »
Pages: [1]   Go Down

Author Topic: Request photos of your new or custom bench seats  (Read 18171 times)

Offline bravo1616

  • Newbie
  • Posts: 53
Request photos of your new or custom bench seats
« on: October 04, 2010, 05:06:10 pm »
I have an 82 GMC K1500 that needs a new seat cover bad (see photo). Someone at work is a novice upholsterer (he's done the campus golf carts and they came out pretty good) and said he could re-upholster my bench seat so I'm looking for ideas. Thanks.

Logged
1982 GMC K1500 Sierra Classic 383 Stroker 4" Rough Country Lift

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18471
    • http://www.73-87chevytrucks.com
Re: Request photos of your new or custom bench seats
« Reply #1 on: October 04, 2010, 05:49:33 pm »
I sell do it yourself kits if your current foam is in good shape.  (have foam also)

you can see the front seat I did for mine here:
http://forum.73-87chevytrucks.com/smforum/index.php?topic=6411.15

Logged

Offline bravo1616

  • Newbie
  • Posts: 53
Re: Request photos of your new or custom bench seats
« Reply #2 on: October 05, 2010, 11:04:49 am »
Is that the only reply I'm gonna get, come on guys, I know you have some seats/interiors to show off.
Logged
1982 GMC K1500 Sierra Classic 383 Stroker 4" Rough Country Lift

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: Request photos of your new or custom bench seats
« Reply #3 on: October 05, 2010, 11:15:52 am »
I built new brackets and put an 06 Ram quadcab 40/20/40 in mine. I can get pictures of it, but it required quite a bit of fabrication to make it work. It was worth it for me though because the seat was free, and it's quite comfy.
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline SUX2BU99

  • Senior Member
  • ****
  • Posts: 1478
    • My Cardomain Site. Truck is on Page 6.
Re: Request photos of your new or custom bench seats
« Reply #4 on: October 05, 2010, 12:13:36 pm »
How is the width of that Ram seat in your cab? I was thinking of a Dakota 40/20/40 seat but maybe that is too narrow. Does that Ram seat have bolt-holes at all 4 corners of each seat, and the center seat? Sounds like it would be complicated making a frame to fit the 4 holes our cabs have.
Logged
85 Chevy Silverado C10 short, wide, yellow, 2wd. Lowered, 60-over 350 with Dart Iron Eagle heads and Comp Cams XE268 cam, TH350 w/ shift kit, 3.40 Gov-lok 12 bolt.

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: Request photos of your new or custom bench seats
« Reply #5 on: October 05, 2010, 01:14:43 pm »
If I remember right it's 1/2" or so wider than the stock bench, about 60" I think. From what I saw of the newer big 3 trucks the dodge had the widest. It uses all 4 original mounting holes, and I tied it into the two seatbelt mounting bolts in the middle. The front mounts I welded L-shaped brackets to it. The ram seat mounts on a flat floor so initially it sat about a foot too high. I made 4" C-channel with 2x2 angle and flat plate for the back mounts. It's solid, and the seats adjust independently, but I might revise the design to something a little less bulky and better looking. It's awesome except you can't just flip the seat ahead to put stuff behind it. I put a 10" sub under the console.
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline bravo1616

  • Newbie
  • Posts: 53
Re: Request photos of your new or custom bench seats
« Reply #6 on: October 05, 2010, 05:08:26 pm »
Quote from: Captkaos on October 04, 2010, 05:49:33 pm
I sell do it yourself kits if your current foam is in good shape.  (have foam also)

hey Captkaos: how much are your do it yourself kits w/o foam, in black?
Logged
1982 GMC K1500 Sierra Classic 383 Stroker 4" Rough Country Lift

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18471
    • http://www.73-87chevytrucks.com
Re: Request photos of your new or custom bench seats
« Reply #7 on: October 05, 2010, 06:05:21 pm »
What style do you want and material? 
Look here:  http://acmeauto.us/gallery/main.php?g2_itemId=4321
U1003 or U1006 style?
Vinyl with velour inserts?
All Vinyl?
all Velour?
Logged

Offline bravo1616

  • Newbie
  • Posts: 53
Re: Request photos of your new or custom bench seats
« Reply #8 on: October 05, 2010, 08:27:00 pm »
maybe the U1003, 81-87 Chevy / GMC Truck Bench Seat in black vinyl.
Logged
1982 GMC K1500 Sierra Classic 383 Stroker 4" Rough Country Lift

Offline ajlaskowski

  • Newbie
  • Posts: 31
Re: Request photos of your new or custom bench seats
« Reply #9 on: October 11, 2010, 01:31:12 pm »
Hey Capt. can you get kits for the 1987 Suburban bucket seats?  I just bought a set to put in my pickup and I cant find covers or foam for them.
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18471
    • http://www.73-87chevytrucks.com
Re: Request photos of your new or custom bench seats
« Reply #10 on: October 11, 2010, 08:02:08 pm »
bravo1616
The U1003 is $165.99 + shipping


ajlaskowski
Yes, I can get anything that is factory and is on that site.

Logged

Offline 756man

  • Newbie
  • Posts: 75
Re: Request photos of your new or custom bench seats
« Reply #11 on: October 11, 2010, 08:29:08 pm »
Hey Capt, How much for U1006 all vinyl, in Charcoal Gray ?
Logged
1985 Chevy K-20 longstepside, 350,Turbo 400

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18471
    • http://www.73-87chevytrucks.com
Re: Request photos of your new or custom bench seats
« Reply #12 on: October 11, 2010, 08:39:49 pm »
All vinyl bench seating regardless of color or year is $165.99 + shipping
velour/vinyl is $190.99
Logged
Pages: [1]   Go Up
« previous next »