« previous next »
Pages: [1]   Go Down

Author Topic: Dash - metal substructure  (Read 3289 times)

Offline 756man

  • Newbie
  • Posts: 75
Dash - metal substructure
« on: October 17, 2010, 11:00:34 pm »
Does the metal substructure, under the dashpad, unbolt and come out ?
Logged
1985 Chevy K-20 longstepside, 350,Turbo 400

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Dash - metal substructure
« Reply #1 on: October 18, 2010, 04:52:49 am »
no and yes. its also spot welded in place at the windshield seam and its bolted to the side of the cab. so you have to take the windshield out and drill out the spot welds
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: Dash - metal substructure
« Reply #2 on: October 18, 2010, 03:41:09 pm »
And there are a number of them....
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Dash - metal substructure
« Reply #3 on: October 18, 2010, 08:06:37 pm »
Lol spaced out what every half inch
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: Dash - metal substructure
« Reply #4 on: October 18, 2010, 10:19:05 pm »
I had one that was all over the place, some right beside each other, but in general about every 1/2 - 1"
Logged
Pages: [1]   Go Up
« previous next »