« previous next »
Pages: [1]   Go Down

Author Topic: drive shaft for 74 k20 with sm465/np205  (Read 2647 times)

Offline reallyrusty

  • Newbie
  • Posts: 13
drive shaft for 74 k20 with sm465/np205
« on: October 31, 2010, 06:35:37 pm »
I have a 1974 k20 (LWB) that i have swapped out a full time np203 for a part time np205, behind my sm465 (4 gear).
I measure 68 inches from u-joint center (transfer case output) to u-joint center (Rear diff). Is there a factory one piece drive shaft out there that works with this application or is it too long and i will need a two piece? I am not finding any one piece shafts....
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: drive shaft for 74 k20 with sm465/np205
« Reply #1 on: October 31, 2010, 09:06:22 pm »
I have one now behind my 465 and 203
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline reallyrusty

  • Newbie
  • Posts: 13
Re: drive shaft for 74 k20 with sm465/np205
« Reply #2 on: October 31, 2010, 09:21:59 pm »
The 203 is a bigger case (longer). I still have that drive shaft. It is too short for the 205 application.
Logged
Pages: [1]   Go Up
« previous next »