Author Topic: Polishing a turd!  (Read 14777 times)

Offline 1LOW4X4

  • Banned
  • Newbie
  • Posts: 25
  • Banned
Polishing a turd!
« on: November 22, 2010, 11:06:37 pm »
I'm sure a lot of you are also members on a few other truck forums but here goes.

1986 chevrolet custom deluxe. Nothing super special, I wanted a truck to drive daily so I could leave the 01 in the garage.

 My dad bought this truck for $100.00 3 years ago and built it as a hot rod/side truck. He built a 350 for it, ported and polished the heads and intake, beefy cam, headers, true duals, glasspack type mufflers. Its loud. Its fast. Super fun little truck.

 Dad never had a lot of extra cash, so every B-day and fathers day or whatever I'd hook him up. Last year I bought him a 2/4" drop kit with new shocks, then replaced his tierods and balljoints, then bought him a window felt kit to keep them from rattling. The front end was all fudged up so he found a 90's model suburban, and stole the front clip from it, hence the GMC front end. He also secured bucket seats and a lot of upholstery parts that the custom deluxe didnt have at the time. New headliner etc.

 Long story short I bought an 85 silverado 3/4 ton in such good condition you wouldnt believe. Everything was intact, and the interior was the burgandy and looked like showroom quality. paid 800 for it, spent 2,000 rebuilding the engine, and he mentioned he wanted to swap. I said sure, cause I wanted him to have something nicer than what he had to drive, and I figured I could make his short wide nice in time.

 I've had it less than a week. I've scrubbed the interior. I've rattle canned the whole truck satin black. I've bought 2 new tires, the other two next week. I scraped all the old tint off and had it limo tinted. I had a new windshield installed today. I bought a donor truck for $200 and off of that I secured an original 86 model grille and headlight bezels, I want it back stock. He had a hideous rear bumper on the back, I took it off and cant decide on a chrome smooth bumper or rollpan. The wheels that are on it came off dads last truck, and the one before that. They are 26 years old, and they are timeless I think. I spent 2 hours on each wheel today polishing them, they came out spotless.

 Next is a spray in bedliner, and new carpet. I love driving this truck, its such a fun truck you wouldnt believe. I havent driven the '01 since I've gotten this one. Enjoy the pics and tune in for frequent updates.

 When he got it. 305, smoked like a freight train, looked like trees had fallen on it.





terrible rear bumper dad made out of a 80 model stepside bumper lol.



AFter the drop


dull wheel


Shiny wheel


Original grille going on tomorrow

 

pieced together interior


new windshield


taking out dents


tacked back in


Ready for rattle can lol


After rattle can and limo tint


Last night. Notice the 90 model front end about to be gone.


As she sits now.


New front end
Heres progress. Swapped in the 85 Silverado front end today. Most think I'm crazy but the 90 model front end looks super cheesy and too "futuristic" if you will for these trucks.





heres a quick vid of the mildly cammed 350 running



Heres some random pics for yall.





Just got back with some new headlights and painted the bezels black for around the headlights, crossing my fingers they look good....

What do ya think

Offline Layne

  • Senior Member
  • ****
  • Posts: 1023
Re: Polishing a turd!
« Reply #1 on: November 22, 2010, 11:57:50 pm »
I like it! I blacked out my bezels, too. Great progress
77 c-10 - 77 400 86 700r4 "Emmy"
83 citation - 2.5L Four on the Floor!
88 sierra - reman 350 700r4 "Eleanor"
All normal practicality and rational money handling goes out of the window when it comes to my truck.

Offline 1LOW4X4

  • Banned
  • Newbie
  • Posts: 25
  • Banned
Re: Polishing a turd!
« Reply #2 on: November 23, 2010, 12:57:06 am »
Thanks, Heres before and after new headlights and black bezels. I'm not sure yet if I like the black bezels but we'll see in the daylight tomorrow!

Before:


After:




They needed replacing anyways so if I dont like them Ill just order new ones in silver. I couldnt find a satin silver spray can....

Offline Altec

  • Newbie
  • Posts: 61
  • Custom De-Luxe
Re: Polishing a turd!
« Reply #3 on: November 23, 2010, 02:18:21 am »
The black bezels look good. The whole truck does.
1981 K10 Short Bread - 6.5NA - SM465

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Polishing a turd!
« Reply #4 on: November 23, 2010, 02:45:38 am »
welcome from maryland nice truck/s
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline 756man

  • Newbie
  • Posts: 75
Re: Polishing a turd!
« Reply #5 on: November 23, 2010, 10:52:50 am »
Nice looking truck, altho I prefer the silver bezels. Do you want to sell the 90' GMC grill and bezels ?  Message me if you do.
1985 Chevy K-20 longstepside, 350,Turbo 400

Offline Laderhosen

  • Frequent Member
  • **
  • Posts: 272
Re: Polishing a turd!
« Reply #6 on: November 23, 2010, 11:35:58 am »
Really nice truck, however I prefer the silver bezels too!!
'82 3/4 ton, 350, th400,
'88 K5 Blazer, 350, 700R4
’98 BMW 328i daily drive
’91 VW Golf Mk 2 with VR6 conv

Offline rainman15

  • Registered Users
  • *
  • Posts: 111
  • Steve
Re: Polishing a turd!
« Reply #7 on: November 23, 2010, 01:22:38 pm »
Nice work!  That is one heck of a large patch you did near the rear tail light.  I still have some lower patch panels for the drivers side of your truck left over from my build if you're interested.
84 GMC High Sierra 4x4 shortbed
09 GMC Sierra SLT
09 Mercedes Benz C-350
60 Chevrolet Impala

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Polishing a turd!
« Reply #8 on: November 23, 2010, 02:35:46 pm »
It looks like it has 2 black eyes, I prefer the silver as well...
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: Polishing a turd!
« Reply #9 on: November 23, 2010, 02:48:27 pm »
By the title of the thread I was convinced it was going to be about a furd pickup.

That's a cool rig. I like the older grill & light setup, and I can dig the black bezels. It's got a good stance and it would look nice with a rollpan behind it.
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline BlackDog3

  • Newbie
  • Posts: 39
Re: Polishing a turd!
« Reply #10 on: November 23, 2010, 03:55:33 pm »
Thats a very nice truck man! I believe it is not a turd!

Chris
1982 Chevy K30 Silverado

Constantly abused, constantly coming back for more.

Offline captain carnage

  • Registered Users
  • *
  • Posts: 143
Re: Polishing a turd!
« Reply #11 on: November 23, 2010, 07:35:47 pm »
Very nice ;D, I think I liked the baby quad front end better though. The bezels could go either way, both look good.
Multiple chevys = neverending projects

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: Polishing a turd!
« Reply #12 on: November 23, 2010, 10:42:22 pm »
Really nice truck. I agree, a rear roll pan would look great. I could go either way with the headlight bezels.
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline snibook7537

  • Registered Users
  • *
  • Posts: 118
  • Vince Ziolkowski
Re: Polishing a turd!
« Reply #13 on: November 24, 2010, 12:23:47 am »
That's funny you mention the front grille being to cheesy and futuristic for these trucks I was thinking aww that looks nice then I scrolled down and saw the correct grille and thought wow that does fit nicer.  Looks great man I have to agree it isn't a turd at all.  Excellent work I hope one day I can do that to mine.
1984 Fiero se pwr windows Holley TBi, cam, 86 5spd
1987 GMC V3500 350 TBi 4spd 205 t-case

Shoulda never sold:
1976 c-10 beater 250-6 4spd no pwr steering, brakes. Recycling truck

Offline Grover 1

  • Frequent Member
  • **
  • Posts: 414
Re: Polishing a turd!
« Reply #14 on: November 24, 2010, 06:21:16 am »
Another vote for silver bezels!
1978 C-10 SWB
1986 K-10 SWB
1975 C-10 SWB

And here I sit so patiently
Waiting to find out what price
You have to pay to get out of
Going through all these things twice - bd