« previous next »
Pages: [1]   Go Down

Author Topic: 1980 4- wheel drive??  (Read 4055 times)

Offline tigwelder

  • Newbie
  • Posts: 83
1980 4- wheel drive??
« on: November 24, 2010, 08:33:49 pm »
i stripped a 1980 K-10 Silverado down to frame.all 4-wheel drive is still hooked up and it has factory lock out hubs.it is a 350 with 350 turbo.truck ran good and all 4-wheel drive worked. i bought it for engine ,plow and new tires.i have K20 plow truck .using rally wheels and tires for trailer.anything on this drive train worth keeping?
Logged

Offline 4x4orbust

  • Frequent Member
  • **
  • Posts: 342
Re: 1980 4- wheel drive??
« Reply #1 on: November 24, 2010, 08:37:59 pm »
if you have the room, and they are in good shape, the tranny and transfer case could be good backups....

Logged
1982 chevy K-10 SWB, 355 th350/np208. 2.5"lift, 33" swampers, headers/duals,  current project

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 1980 4- wheel drive??
« Reply #2 on: November 24, 2010, 10:15:05 pm »
Drive shafts also you also could become a site supporter and try to sell the stuff on here
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline fitz

  • Senior Member
  • ****
  • Posts: 2085
Re: 1980 4- wheel drive??
« Reply #3 on: November 25, 2010, 06:33:54 am »
As far as I know all 1980 4x4's came with a 205 transfer case regardless of the tranny.
Definatly keep the 205.
Logged
Pages: [1]   Go Up
« previous next »