« previous next »
Pages: [1]   Go Down

Author Topic: P/S return hose  (Read 3632 times)

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
P/S return hose
« on: February 05, 2011, 02:58:25 pm »
Does the PS return hose need to have a PSI rating? Will a transmission hose work?
Logged

Offline Da67goatman

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 758
  • Burban
Re: P/S return hose
« Reply #1 on: February 05, 2011, 03:17:21 pm »
trans line will work, just make sure to double clamp it at each end.
Logged
<Pitcrew>
1989 R2500 Suburban mild 350 TBI 700r4 10.5" 14bolt 4.10 w/ 33s
1992 fullsize Blazer 4x4  35s no lift, 4.10s, Hella driving lights, TJ Flares, Huge bumpers, Snorkel, custom interior

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: P/S return hose
« Reply #2 on: February 05, 2011, 03:19:46 pm »
Correct, it's not under high pressure. Any hose that is resistant to oil/fuel should work. I used fuel line on mine.
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: P/S return hose
« Reply #3 on: February 06, 2011, 04:01:53 pm »
Quote from: Grim 82 on February 05, 2011, 03:19:46 pm
Correct, it's not under high pressure. Any hose that is resistant to oil/fuel should work. I used fuel line on mine.

     x2,  I have done the same thing with no problems.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: P/S return hose
« Reply #4 on: February 07, 2011, 01:18:05 pm »
Sweet
Logged
Pages: [1]   Go Up
« previous next »