1
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
TODAY
is a Great Day to visit our
Store
and order the parts you need for your truck ! ! !
Home
Forum
Store
Help
Search
Gallery
Login
Register
73-87chevytrucks.com
»
73-87 Chevy _ GMC Trucks
»
4 Wheel Drives
»
85 208 ??
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: 85 208 ?? (Read 4578 times)
tigwelder
Newbie
Posts: 83
85 208 ??
«
on:
February 20, 2011, 12:57:08 pm »
85 K20 208 has small drip , how hard is it to service?
Logged
bake74
Senior Member
Posts: 5871
Re: 85 208 ??
«
Reply #1 on:
February 20, 2011, 03:49:09 pm »
Small drip from where ?
. Could be something simple like a loose plug or something more like a seal that is going out. With the tools, patience, and a good mechanical skills, rebuilding is not that hard.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
74 k10, 77k10 Tom
tigwelder
Newbie
Posts: 83
Re: 85 208 ??
«
Reply #2 on:
February 21, 2011, 08:44:15 pm »
the leak starts above where the 2 bolts hold the support bracket. can this back half be removed and new gasket installed in truck?looks like it has a sloppy job of black atv around it.
Logged
Psycho71
Registered Users
Posts: 239
Re: 85 208 ??
«
Reply #3 on:
February 21, 2011, 08:49:26 pm »
There is no gasket where the two halves mate together, only RTV. I've had my 208 apart on the bench, and I'd never attempt to split the case while it's under the truck. Not unless I could come up with a way to stand the truck on it's nose
Mine was a bit of a challenge to get everything lined back up properly while it was on the bench. I could see a huge amount of cussing going on if I attempted to split it, and put it back together, while it was installed. I'm sure somewhere, someone has successfully done it. But I'll never attempt it.
Logged
There are two tools needed, duct tape and WD40. If it moves and shouldn't, use the duct tape. If it doesn't move and should, use the WD 40.
tigwelder
Newbie
Posts: 83
Re: 85 208 ??
«
Reply #4 on:
February 21, 2011, 09:26:19 pm »
ok thanks.
Logged
Grim 82
Senior Member
Posts: 1651
Re: 85 208 ??
«
Reply #5 on:
February 25, 2011, 09:11:31 am »
Agreed, if you put the case front down on a bench all the guts will stay in the front when you split the case. Don't try it in the truck.
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.
Print
Pages: [
1
]
Go Up
« previous
next »
73-87chevytrucks.com
»
73-87 Chevy _ GMC Trucks
»
4 Wheel Drives
»
85 208 ??