« previous next »
Pages: [1]   Go Down

Author Topic: DJM 5/5  (Read 6398 times)

Offline thachevythang

  • Registered Users
  • *
  • Posts: 231
DJM 5/5
« on: March 03, 2011, 01:16:03 am »
Does anybody have any reviews or comments on their kit? Comes with spindles, springs, flip kit and shocks. For 30 dollars more I can get the control arms.

I don't think I want to trust the cheap ebay flip kits for 30 bucks! I'd end up with a 3/5 but want to go lower.
Logged
'85 SHORTBED

Offline mats1985gmc

  • Newbie
  • Posts: 77
Re: DJM 5/5
« Reply #1 on: March 03, 2011, 08:21:09 am »
if I was to do it over again I would have gotten the control arms, plus you can do your bushings at the same time.
Logged

Offline slammed79

  • Senior Member
  • ****
  • Posts: 1367
  • Thou shalt not drive stock
Re: DJM 5/5
« Reply #2 on: March 03, 2011, 01:24:47 pm »
DJM is good stuff, a little spendy but good stuff.
Logged
74 C10 Long bed 350/SM465 Lowered on 20's

Praise the lowered

Offline team39763

  • Senior Member
  • ****
  • Posts: 1194
Re: DJM 5/5
« Reply #3 on: March 03, 2011, 07:46:04 pm »
I bought the cheap ebay flipkit(bracket only).  It wasn't too bad.  My buddy decided against it and just bought some trailer leafspring perches and welded them on.  If I had to do it again I would buy the trailer perches and have them welded on at my desired pinion angle.
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: DJM 5/5
« Reply #4 on: March 07, 2011, 06:55:08 pm »
DJM makes a quality kit...
Logged

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: DJM 5/5
« Reply #5 on: March 10, 2011, 09:36:56 pm »
Ive got the upper and lower DJMs on my truck, The alignment shop said it was the best method for drop theyd seen. Rides nice
Logged
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline thachevythang

  • Registered Users
  • *
  • Posts: 231
Re: DJM 5/5
« Reply #6 on: March 11, 2011, 03:37:55 am »
I wanted a 5/7 drop so I put the money on the 2" shackles and just the lower control arms. I might have to put my stock leafs back in because I have lowering leafs now. I'm fearing a reverse rake with my current set up. If it sits nice and I can take a coil off up front for it to sit even I'll take it off the stock springs and see where I'm at. I'll post the results. Truck running like crap now and working on that but I have the kit and it might be some time for install.
Logged
'85 SHORTBED
Pages: [1]   Go Up
« previous next »