« previous next »
Pages: [1] 2   Go Down

Author Topic: 86 Silverado in the process  (Read 10993 times)

Offline 86silverado

  • Newbie
  • Posts: 71
86 Silverado in the process
« on: June 27, 2011, 12:24:11 pm »






So far have rockers and cab corners in,  had to get another driver side fender. truck has 35s on it had to put smaller tires to get in shop.   will get pics of rockers and corners soon. truck should be ready for paint soon, still have to finish bed.  waitin on panels to come in.            Bought a complete running and driving 82 1/2ton 4x4 scottsdale the other day for 100 bucks. was gonna use bed then went to look at it and it wasnt any better, but price was good.  has new tires and runs good. tranny slips though,  so that will be my next project.      let me know what you all think.
Logged

Offline big bear

  • Junior Member
  • ***
  • Posts: 681
Re: 86 Silverado in the process
« Reply #1 on: June 27, 2011, 02:58:20 pm »
great start man
Logged

Offline Engineer

  • Senior Member
  • ****
  • Posts: 1402
Re: 86 Silverado in the process
« Reply #2 on: June 27, 2011, 09:34:33 pm »
As my 15 year old kid would say "that's in".  ;D

Keep going. We can never have too many square bodys in the Show-Me-State.  :)

Oh, BTW, is there a way that you could scale down the pics a little?
Logged
2002 Chevy 2500HD 4x4 8.1/ZF6sp RC/LB
2001 Chevy 2500HD 4x4 6.0/4L85E EC/SB
1997 Chevy Blazer 4x4
1994 Chevy K-2500 4x4 C6P 5.7/4L80E
1979 Chevy K-30 4x4 4sp 4.10
1977 Chevy K-30 4x4 4sp 4.10 454

Dad of an Eagle Scout, and a Life Scout

Offline 86silverado

  • Newbie
  • Posts: 71
Re: 86 Silverado in the process
« Reply #3 on: June 27, 2011, 10:38:12 pm »
i tried to make them smaller idk. thats as small as they get for me ig.   ik i love seein square bodies everywhere
Logged

Offline 86silverado

  • Newbie
  • Posts: 71
Re: 86 Silverado in the process
« Reply #4 on: June 27, 2011, 10:44:17 pm »





this is pics of truck before
Logged

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: 86 Silverado in the process
« Reply #5 on: June 28, 2011, 11:42:32 am »
Cool project
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline 69byrd

  • Senior Member
  • ****
  • Posts: 1167
  • Haulin!
Re: 86 Silverado in the process
« Reply #6 on: June 28, 2011, 11:51:00 am »
Great start
Logged
84 C-10 Stepside       
54 Chevy Truck
Gotta Love Those Stepsides!
http://s493.photobucket.com/albums/rr299/69byrd/?start=all

Offline hotrod24

  • Senior Member
  • ****
  • Posts: 1696
Re: 86 Silverado in the process
« Reply #7 on: June 28, 2011, 03:59:10 pm »
Looking good...
Logged
1980 1/2 ton shortbed project...
1978 pontiac grand prix...

Offline 86silverado

  • Newbie
  • Posts: 71
Re: 86 Silverado in the process
« Reply #8 on: June 30, 2011, 01:17:40 pm »
last night got front clip blocked and primered again,  gonna fix a few small spots we dont like, then wetsend the entire thing.  switched primers was using masterpro red oxide from oreillys. but my friend picked up two gallons of XIM from his work. the XIM comes thinned already, only thing is doesnt sand near as good as red oxide.  took twice as long to get stuff done the other day.  more pics coming soon.   thanks for the comments,
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 86 Silverado in the process
« Reply #9 on: July 11, 2011, 07:10:35 am »
     You are correct, can always do with more square bodies on the road.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline 86silverado

  • Newbie
  • Posts: 71
Re: 86 Silverado in the process
« Reply #10 on: February 11, 2012, 02:08:37 pm »
Never got around to getting pics finished, Got one waitin for all of em to upload
Logged

Offline heavychevy91

  • Frequent Member
  • **
  • Posts: 322
  • '86 Chevy K20
Re: 86 Silverado in the process
« Reply #11 on: February 11, 2012, 04:12:13 pm »
Looking good man. Bet your proud of it.
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 86 Silverado in the process
« Reply #12 on: February 11, 2012, 08:32:09 pm »
Quote from: 86silverado on February 11, 2012, 02:08:37 pm
Never got around to getting pics finished, Got one waitin for all of em to upload


       I have to ask, (the one with his hand flat against the window) is he communicating with the truck ?  If only, the stories we could get told.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline 86silverado

  • Newbie
  • Posts: 71
Re: 86 Silverado in the process
« Reply #13 on: February 11, 2012, 11:38:21 pm »
Lol no I was taking him to school and we were scrapin ice off window.    That truck would have slot of stories. It has had alot of owners and was mistreated it's probably sayin thank God lol.  383 is coming out soon though puttin together a 454. Motor in it now has less than 1000 miles but it was built for race and has alot put in it. Solid lifter cam not sure of specs cam range is 2800 7500. Icon pistons. Roller rockers with screw in studs and 882heads  202.160 Manley  valves  1182 crank procomp rods. Weiend7546 intake speed demon carb. But it's just too much for daily driver. And valves always need adjusted which gets old wouldnt be bad in a racecar  motor has alot of power im just lookin for lowend usuable powerGot it for sale
« Last Edit: February 11, 2012, 11:43:29 pm by 86silverado »
Logged

Offline firefighter

  • Frequent Member
  • **
  • Posts: 462
Re: 86 Silverado in the process
« Reply #14 on: February 11, 2012, 11:53:40 pm »
Lookin real good !!

You were scraping ice off the windows?
As a dad, I ask...... shorts and T-shirts? Where's your coats ???       ;D

Love the truck !!
Logged
Pages: [1] 2   Go Up
« previous next »