All Classified forums require a Site Supporter subscription. It is only $25 per year and you can buy and sell whatever you like on the forum. To become a Site Supporter, go to Your Profile and select "Paid Subscriptions."
Only thing I might have done differently is welded the holes shut before you bondo'd. Otherwise looks good!
Maybe so. Just saw a couple in the pic that were half full of filler. My bad, sorry.
The frame did not look all that bad from the picture. Did you catch it in time before it really got rusted ?
I found a few of the leaf spring mounting bolts were seized inside of the steel sleeve they slide through at the ends. That means you can't remove the leaf spring bolt which of course means you can't remove the leaf spring. I tried cutting through them with an electric construction saw and metal blade but something in there must be hardened. I'm guessing the steel sleeve. It was just eating up the teeth on the saw blade. I ended up having to use a cut off tool to grind through the bolts and sleeves on both sides of the leaf spring.