« previous next »
Pages: [1] 2   Go Down

Author Topic: 1990 Blazer build  (Read 9634 times)

Offline gharris79

  • Newbie
  • Posts: 76
  • Chevy Freak
1990 Blazer build
« on: November 01, 2011, 06:32:55 am »
Hey guy's i'm new on here so i thought i'd share some pics of my Blazer build.
Logged
87 Chevy Silverado 2wd, 1990 Blazer, 2017 Honda Accord

Offline gharris79

  • Newbie
  • Posts: 76
  • Chevy Freak
1990 Blazer build
« Reply #1 on: November 01, 2011, 06:34:51 am »
More pics. Had to replace the rear tail pan, full 1/4's, floor pans, rocker panels, front fenders and inner fenders.
« Last Edit: November 01, 2011, 06:36:45 am by gharris79 »
Logged
87 Chevy Silverado 2wd, 1990 Blazer, 2017 Honda Accord

Offline gharris79

  • Newbie
  • Posts: 76
  • Chevy Freak
Re: 1990 Blazer build
« Reply #2 on: November 01, 2011, 06:39:19 am »
Decided to add a set of Mickey Thompson Classic's and changed from BFG Mud Terrain's to All Terrain's
Logged
87 Chevy Silverado 2wd, 1990 Blazer, 2017 Honda Accord

Offline gharris79

  • Newbie
  • Posts: 76
  • Chevy Freak
Re: 1990 Blazer build
« Reply #3 on: November 01, 2011, 06:41:55 am »
Changed the interior from Grey to Blue.
Logged
87 Chevy Silverado 2wd, 1990 Blazer, 2017 Honda Accord

Offline gharris79

  • Newbie
  • Posts: 76
  • Chevy Freak
Re: 1990 Blazer build
« Reply #4 on: November 01, 2011, 06:45:19 am »
More interior shots.  Carpet and billet pieces. The front seats are out of a 1994 Extended cab Chey and the rear seat is from a 1990 Suburban.
« Last Edit: November 01, 2011, 12:28:26 pm by Captkaos »
Logged
87 Chevy Silverado 2wd, 1990 Blazer, 2017 Honda Accord

Offline Engineer

  • Senior Member
  • ****
  • Posts: 1402
Re: 1990 Blazer build
« Reply #5 on: November 01, 2011, 06:49:46 pm »
I approve. :)
Logged
2002 Chevy 2500HD 4x4 8.1/ZF6sp RC/LB
2001 Chevy 2500HD 4x4 6.0/4L85E EC/SB
1997 Chevy Blazer 4x4
1994 Chevy K-2500 4x4 C6P 5.7/4L80E
1979 Chevy K-30 4x4 4sp 4.10
1977 Chevy K-30 4x4 4sp 4.10 454

Dad of an Eagle Scout, and a Life Scout

Offline gharris79

  • Newbie
  • Posts: 76
  • Chevy Freak
Re: 1990 Blazer build
« Reply #6 on: February 22, 2012, 03:38:37 pm »
Well I now have a task ahead of me for the Blazer. While driving on Saturday my engine compartment caught fire and burnt all the engines wiring, plug wires and AC box. I don't know where it started just yet cause I'm too mad to even look at it.. Going to start to tear it apart on the weekend and go from there.
Logged
87 Chevy Silverado 2wd, 1990 Blazer, 2017 Honda Accord

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 1990 Blazer build
« Reply #7 on: February 23, 2012, 05:16:00 am »
     Sorry to hear about the engine compartment fire.  The only way to look at something like that is when you are done, your engine compartment will have all new wiring and be all freshened up and look pretty.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline gcochran223

  • Registered Users
  • *
  • Posts: 148
Re: 1990 Blazer build
« Reply #8 on: February 26, 2012, 12:33:41 am »
looks bad ass
Logged
1986 k15, 355, th400 ,np205, Corporate 10 bolt,corporate 12 bolt, 8" suspension lift.4.56 yukon gears.

Offline 87454westernhauler

  • Frequent Member
  • **
  • Posts: 453
Re: 1990 Blazer build
« Reply #9 on: February 26, 2012, 01:03:11 am »
Love the interior, atleast u didnt loose the entire truck in the fire! saw this one in a local junk yard that some one had just rebuilt from the looks of it and had an engine fire that got in to the cab and the whole thing pretty much went up in flames from the looks of it!  :(
Logged
86 c10 350 sbc 700R4 Daily Driver
79 gmc c20 350 th350
78 k1500 4x4 350 th350

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 1990 Blazer build
« Reply #10 on: February 26, 2012, 06:37:07 am »
Quote from: 87454westernhauler on February 26, 2012, 01:03:11 am
Love the interior, atleast u didnt loose the entire truck in the fire! saw this one in a local junk yard that some one had just rebuilt from the looks of it and had an engine fire that got in to the cab and the whole thing pretty much went up in flames from the looks of it!  :(

       Now that looks ugly.  I am a big fan of doing something the right way to avoid a situation like that, wiring can cause all kinds of problems if you don't do it right the first time.   :'(
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline gharris79

  • Newbie
  • Posts: 76
  • Chevy Freak
Re: 1990 Blazer build
« Reply #11 on: February 26, 2012, 02:23:46 pm »
Got it runnig again today! I swapped out the harness and it fired right up. I think it was caused by the tranny heating up and spitting the fluid out onto the manifold. I might be into a tranny swap but going to try a filter and fluid first.
Logged
87 Chevy Silverado 2wd, 1990 Blazer, 2017 Honda Accord

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 1990 Blazer build
« Reply #12 on: February 27, 2012, 05:35:23 am »
Quote from: gharris79 on February 26, 2012, 02:23:46 pm
Got it runnig again today! I swapped out the harness and it fired right up. I think it was caused by the tranny heating up and spitting the fluid out onto the manifold. I might be into a tranny swap but going to try a filter and fluid first.

     Did you have a line burst on your tranny ?  How did you figure the fluid spit out on the manifold.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline gharris79

  • Newbie
  • Posts: 76
  • Chevy Freak
Re: 1990 Blazer build
« Reply #13 on: February 27, 2012, 06:12:24 am »
Quote from: bake74 on February 27, 2012, 05:35:23 am
Quote from: gharris79 on February 26, 2012, 02:23:46 pm
Got it runnig again today! I swapped out the harness and it fired right up. I think it was caused by the tranny heating up and spitting the fluid out onto the manifold. I might be into a tranny swap but going to try a filter and fluid first.

     Did you have a line burst on your tranny ?  How did you figure the fluid spit out on the manifold.

There was fluid on the intake, valve covers and the manifold was all black. I checked the fluid while it was running and added some to top it off. There was no leaks while it was running.
Logged
87 Chevy Silverado 2wd, 1990 Blazer, 2017 Honda Accord

Offline gharris79

  • Newbie
  • Posts: 76
  • Chevy Freak
Re: 1990 Blazer build
« Reply #14 on: March 13, 2012, 07:04:17 pm »
Tranny's toast. Picked up another one and had it rebuilt. Will be installing it this weekend.
Logged
87 Chevy Silverado 2wd, 1990 Blazer, 2017 Honda Accord
Pages: [1] 2   Go Up
« previous next »