« previous next »
Pages: [1]   Go Down

Author Topic: 79 GMC Flatbed mud truck  (Read 7290 times)

Offline BlueCollarRon

  • Newbie
  • Posts: 83
79 GMC Flatbed mud truck
« on: November 19, 2011, 10:20:06 pm »
 i traded a xd springfield 9mm for this truck from a guy who thought it wouldnt run. I payed 450 for the gun so I guess thats what the truck cost me.  I was getting spark and fuel to the carb but not past the float so I smacked it with a hammer.lol.

when I first got it she had a 350-4speed-205 dana 44 and corporate 14 full float.  I soon stuck a 6 in lift under it and used 36 humv tires (16.5).  I then replaced the 4 speed and 205 with another unit that shifted better and put a new clutch in it.

Everytime i would drop the clutch I'd snap an axle joint so the other weekend i put in my turbo 400 (rebuilt w/ stage 2 shift kit), diesel toque converter and a turbo 400.  I know the real issue is the front end, I need to buy the steering or just make a lift block because i do have a dana 60, would have to then find a 4.11 full floater.

Now she is sitting on 39.5 swampers and I changed the front chrome to a 75.  Had to cut the fenders up front, they was rusted anyways.



http://www.youtube.com/watch?v=TGzEMzOvHVo

http://www.youtube.com/watch?v=Ay6okO0RvWc
Thanks!
Logged

Offline bigchevyc30

  • Frequent Member
  • **
  • Posts: 456
  • the pig
Re: 79 GMC Flatbed mud truck
« Reply #1 on: November 19, 2011, 11:05:55 pm »
awsome truck man
Logged
1980 c-30 dually R.I.P
1989 R2500 Sub 350/sm465
1984 k10 sub 6.2/700r4

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 79 GMC Flatbed mud truck
« Reply #2 on: November 19, 2011, 11:13:13 pm »
     So you use it as a mud truck ?  Just for fun or racing ?
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline firefighter

  • Frequent Member
  • **
  • Posts: 462
Re: 79 GMC Flatbed mud truck
« Reply #3 on: November 19, 2011, 11:46:56 pm »
Looks like you were having some fun in your videos !!   ;D
Logged

Offline gto109

  • Frequent Member
  • **
  • Posts: 405
Re: 79 GMC Flatbed mud truck
« Reply #4 on: November 20, 2011, 06:10:50 am »
Now that looks like fun.
Logged
67 Le Mans Convertible resto project 350 Pontiac w/powerglide,
85 Scottsdale k-10 305 700r4,
86 Trans Am 305 350th
06 Dodge Ram daily driver

Offline BlueCollarRon

  • Newbie
  • Posts: 83
Re: 79 GMC Flatbed mud truck
« Reply #5 on: November 20, 2011, 03:39:21 pm »
lol thanks guys. This year she was just pure fun as well as a great pull out truck.  I towed out *at least* 20+ last summer.  I imagine this coming year I will race it, being I did away with the 4speed for a built 400.

Any of you guys got a lift on your truck? measure from the top of the ubolt pad to the bottom of your frame.  I get 11 inches in the front which seems bigger then 6 in of lift.  my 4 in lift truck measures 7inches

Watch this video here :D lol

right when my brother says "oh its fine".....
http://www.facebook.com/#!/photo.php?v=10150473093905097&set=vb.572670096&type=2&theater
At that spot I pulled a 2 wheel drive v10 superduty out of that hole, plus a pathfinder, and a couple chevys. just within a week.
« Last Edit: November 20, 2011, 03:41:40 pm by BlueCollarRon »
Logged
Pages: [1]   Go Up
« previous next »