« previous next »
Pages: [1]   Go Down

Author Topic: Stock height  (Read 4467 times)

Offline bd91gmc

  • Newbie
  • Posts: 6
  • Newbie
Stock height
« on: November 29, 2011, 07:04:20 pm »
Can someone give me the stock measurements on the front of there truck? From the ground to the wheel well opening?
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Stock height
« Reply #1 on: November 29, 2011, 08:33:29 pm »
Quote from: bd91gmc on November 29, 2011, 07:04:20 pm
Can someone give me the stock measurements on the front of there truck? From the ground to the wheel well opening?

You are going to have to be a little more specific.. C10 or C20... K10 or K20... What stock size tire? There were a lot of options.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Stock height
« Reply #2 on: November 29, 2011, 11:46:10 pm »
also the gvw
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Stock height
« Reply #3 on: November 30, 2011, 06:17:59 pm »
      What engine you have also, straight 6 weighs a lot less than a 454.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18454
    • http://www.73-87chevytrucks.com
Re: Stock height
« Reply #4 on: December 12, 2011, 08:14:31 pm »
Need much more info on what you want measured.
Logged
Pages: [1]   Go Up
« previous next »