« previous next »
Pages: [1]   Go Down

Author Topic: Slot Mags!!!! (atten Fitz!)  (Read 6108 times)

Offline 79k30guy

  • Registered Users
  • *
  • Posts: 153
  • 1979 Cheyenne K-30, 400/th400, np203 6in lift
Slot Mags!!!! (atten Fitz!)
« on: January 19, 2012, 08:24:39 pm »
Just acquired our second set from a used tire/wheel shop here locally. Now just gotta find one more set.  so my dad, brother, and I all will be rolling on 16.5 x 9.75 8 lug classics!   Gonna have to clean all these up, and find some of the special lugs required for these. does anybody know where we could buy them at a reasonable price?  say, like 24 of them?   ;D    and we should probably go ahead and get a few keyed sets of lugs, man it would break my heart to have these stolen.  it took forever to find them. 
Logged
A Chevy straight Axel family.. DAD:'74 K20 (dana 60 up front) TWIN BROTHER: 76 K20 3+3 ME: '79 K30.

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Slot Mags!!!! (atten Fitz!)
« Reply #1 on: January 19, 2012, 08:45:45 pm »
     Nice find, I have seen a post here about the lug nuts for those, I believe it was when someone was showing how to clean old slot mags.  My brain is kinda fried right now, (very long week at work), someone will bail me out when they see this and will remember.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline 74k20

  • Registered Users
  • *
  • Posts: 145
Re: Slot Mags!!!! (atten Fitz!)
« Reply #2 on: January 19, 2012, 09:47:12 pm »
I found mine for $61 total (after shipping) at EZAccessory online.  You might be able to find cheaper, but they came to my door without driving around town finding them  I still need the rear center cap however.
Logged

Offline 79k30guy

  • Registered Users
  • *
  • Posts: 153
  • 1979 Cheyenne K-30, 400/th400, np203 6in lift
Re: Slot Mags!!!! (atten Fitz!)
« Reply #3 on: January 19, 2012, 10:41:00 pm »
Quote from: bake74 on January 19, 2012, 08:45:45 pm
     Nice find, I have seen a post here about the lug nuts for those, I believe it was when someone was showing how to clean old slot mags.  My brain is kinda fried right now, (very long week at work), someone will bail me out when they see this and will remember.
i already found it!  lol.. i did that thing where i ask before looking, then i looked, and i found..      thanks anyway bake,
http://forum.73-87chevytrucks.com/smforum/index.php/topic,17252.0.html
Logged
A Chevy straight Axel family.. DAD:'74 K20 (dana 60 up front) TWIN BROTHER: 76 K20 3+3 ME: '79 K30.

Offline 79k30guy

  • Registered Users
  • *
  • Posts: 153
  • 1979 Cheyenne K-30, 400/th400, np203 6in lift
Re: Slot Mags!!!! (atten Fitz!)
« Reply #4 on: January 19, 2012, 10:42:56 pm »
Quote from: 74k20 on January 19, 2012, 09:47:12 pm
I found mine for $61 total (after shipping) at EZAccessory online.  You might be able to find cheaper, but they came to my door without driving around town finding them  I still need the rear center cap however.
gonna check them out right now.... 
Logged
A Chevy straight Axel family.. DAD:'74 K20 (dana 60 up front) TWIN BROTHER: 76 K20 3+3 ME: '79 K30.

Offline heavychevy91

  • Frequent Member
  • **
  • Posts: 322
  • '86 Chevy K20
Re: Slot Mags!!!! (atten Fitz!)
« Reply #5 on: January 20, 2012, 06:47:42 pm »
Check out Summit Racing as well i bought some for my mags there.

http://www.summitracing.com/parts/MCG-62822/

These are the right length ones i needed for my wheels, not sure about slot mags.

McGard offered wheel locks in this style too IIRC
Logged

Offline fitz

  • Senior Member
  • ****
  • Posts: 2085
Re: Slot Mags!!!! (atten Fitz!)
« Reply #6 on: January 22, 2012, 06:53:45 am »
Glad to see you found some rims.
It will be great to see your dads truck with those back on it.
Just 1 more set to find.
The lugnuts on my stepside came from a company called Mcgaurd.
Logged
Pages: [1]   Go Up
« previous next »